Liquid Crystalline Siloxane-Containing Poly(ester imide)s with Low Dielectric Constant and Low Dielectric Loss at 10 GHz
Polymers · 24.03.2026 · 18 (7) · 782
DOI: 10.3390/polym18070782 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 24.03.2026. Verfasst von Qing Peng und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Basic and Applied Basic Research Foundation, 5G Communication Key Materials and Applications Program of Guangdong Province.
Abstract (Originalsprache)
The development of high-performance polymers exhibiting both low dielectric constant (Dk) and low dielectric loss (Df) at high frequencies is highly desirable yet challenging for applications in microelectronics and wireless communication technologies. In this work, a series of siloxane-containing poly(ester imide)s (SiPEIs) are designed and synthesized via a two-step polymerization route, using 1,4-phenylene bis(1,3-dioxo-1,3-dihydroisobenzofuran-5-carboxylate) (TAHQ) as the dianhydride monomer, and 1,3-bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane (DMS) together with 4,4′-diaminodiphenyl ether (ODA) as the diamine comonomers. Although the introduction of short siloxane segments lowers the glass transition temperature (Tg) and the tensile strength of the resulting PEIs, they still remain at a relatively high level. Liquid crystalline phase behavior is observed at lower temperature for the siloxane-containing PEIs. Meanwhile, the hydrophobicity and the high-frequency dielectric performance is effectively improved with increasing siloxane content. Notably, SiPEI-20, prepared with 20 mol% DMS, displays an outstanding integrated performance. It exhibits a Tg of 200 °C, a Dk of 2.87 and a Df of 0.00155 at 10 GHz, as well as an adhesive strength of 0.85 N·mm−1 on copper foil. Overall, this work provides a feasible strategy by incorporating siloxane into the PEI backbone, enabling the synergistic enhancement of high-frequency dielectric properties (simultaneous reduction in Dk and Df) and adhesion to copper foil.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China.
- Guangdong Provincial Key Enterprise Laboratory of Novel Polyamide 6 Functional Fiber Materials Research and Application, Jiangmen 529100, China.
- Key Laboratory of Polymer Processing Engineering, South China University of Technology, Ministry of Education, Guangzhou 510640, China.
ORCID-Profile: Qiwei Pan
Förderung
- Guangdong Basic and Applied Basic Research Foundation
- 5G Communication Key Materials and Applications Program of Guangdong Province
Zitieren
APA
Peng, Q., Zhang, W., Pan, Q., Liu, S., & Zhao, J. (2026). Liquid Crystalline Siloxane-Containing Poly(ester imide)s with Low Dielectric Constant and Low Dielectric Loss at 10 GHz. Polymers, 18(7), 782. https://doi.org/10.3390/polym18070782
Vancouver
Peng Q, Zhang W, Pan Q, Liu S, Zhao J. Liquid Crystalline Siloxane-Containing Poly(ester imide)s with Low Dielectric Constant and Low Dielectric Loss at 10 GHz. Polymers. 2026;18(7):782. doi:10.3390/polym18070782
BibTeX
@article{Peng2026,
author = {Peng, Qing and Zhang, Wenxiang and Pan, Qiwei and Liu, Shumei and Zhao, Jianqing},
title = {Liquid Crystalline Siloxane-Containing Poly(ester imide)s with Low Dielectric Constant and Low Dielectric Loss at 10 GHz},
journal = {Polymers},
year = {2026},
volume = {18},
number = {7},
pages = {782},
doi = {10.3390/polym18070782}
}
EUVIMED