EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dynamics of Drone Blades Based on Polymer Nanocomposites Incorporating Graphene, Carbon Nanotube, and Fullerene

Workineh G Gomera iD, Tomasz Tański iD, Jung Yong Kim iD

Polymers · 23.03.2026 · 18 (6) · 778

DOI: 10.3390/polym18060778 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.03.2026. Verfasst von Workineh G Gomera und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Adama Science and Technology University, Adama 01888, Ethiopia. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Silesian University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer nanocomposites offer significant potential for improving the strength-to-weight ratio and dynamic behavior of drone blades. This study examines the vibration characteristics of tapered aramid (Kevlar)/epoxy composite blades reinforced with nanocarbon fillers—graphene (2D), multi-walled carbon nanotubes (MWCNTs, 1D), and fullerene (0D)—to determine the most effective filler for enhancing stiffness and operational stability. The laminated blades (300 mm length, 200 mm width, root thickness 13 mm, tip thickness 8 mm) incorporate ply drop-offs and a central honeycomb core. Modeling was performed using classical laminate plate theory integrated with the finite element method (FEM) in MATLAB (R2016a). Under clamped–free–free–free boundary conditions, the study considered rotational speeds of 750–2250 rpm, setting angles of 30–60°, various fiber orientations, and nanofiller contents of 0–10 wt.%. The results indicate that while the setting angle minimally affects natural frequency, it significantly influences damping in modes (1,2) and (2,1). Increasing nanofiller content improves stiffness, with optimal performance observed near 5 wt.%. At 1500 rpm in mode (1,1), MWCNTs provided the greatest enhancement. Overall, MWCNTs exhibited superior stiffness improvement and rotational stability compared to other fillers.

Schlagwörter

Stichwörter der Autor:innen

carbon nanotubeclassical laminate plate theorydrone bladedynamicsfinite element methodfullerenegraphenenanocarbonsnanocomposite

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Adama Science and Technology University, Adama 01888, Ethiopia.
  • Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, 44-100 Gliwice, Poland.
  • Department of Renewable Energy, Korean Institute of Technology and Culture, Samarkand International University of Technology, Samarkand 140100, Uzbekistan.

ORCID-Profile: Workineh G Gomera, Tomasz Tański, Jung Yong Kim

Förderung

  • Silesian University of Technology

Zitieren

APA

Gomera, W. G., Tański, T., & Kim, J. Y. (2026). Dynamics of Drone Blades Based on Polymer Nanocomposites Incorporating Graphene, Carbon Nanotube, and Fullerene. Polymers, 18(6), 778. https://doi.org/10.3390/polym18060778

Vancouver

Gomera WG, Tański T, Kim JY. Dynamics of Drone Blades Based on Polymer Nanocomposites Incorporating Graphene, Carbon Nanotube, and Fullerene. Polymers. 2026;18(6):778. doi:10.3390/polym18060778

BibTeX
@article{Gomera2026,
  author = {Gomera, Workineh G and Tański, Tomasz and Kim, Jung Yong},
  title = {Dynamics of Drone Blades Based on Polymer Nanocomposites Incorporating Graphene, Carbon Nanotube, and Fullerene},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {6},
  pages = {778},
  doi = {10.3390/polym18060778}
}
Kostenlos starten →