EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Differentiated Stem Cell-Seeded Gelatin/PLA/P(3HB-co-4HB) Meniscal Scaffold with Biocompatibility and Mechanical Strength

Peng Li, Xiaoxin Cheng, Wuwei Li, Haiqing Yang, Yubi Jiang

Polymers · 23.03.2026 · 18 (6) · 774

DOI: 10.3390/polym18060774 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.03.2026. Verfasst von Peng Li und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Joint and Sports Medicine, The Second Hospital of Dalian Medical University, Dalian 116023, China. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: "1+X" program for Clinical Competency Enhancement - Interdisciplinary Innovation Project, The Second Hospital of Dalian Medical University, “1+X” program for Clinical Competency Enhancement—Interdisciplinary Innovation Project, The Second Hospital of Dalian Medical University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laceration is one of the most common meniscus injuries, which can cause knee joint dysfunction. The treatment of meniscus injuries remains one of the greatest challenges in orthopedics. In this study, a three-dimensional sponge-like Poly(lactic acid)/Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (PLA/P(3HB-co-4HB)) scaffold with oriented microtubules was fabricated using an improved gradient thermal phase separation technique. The scaffold surface was modified by adsorbing gelatin. The surface-modified scaffolds and the unmodified scaffolds were divided into two groups. All preparation parameters were adjusted to meet tissue engineering requirements. The prepared scaffolds were tested for porosity, compression modulus, hydrophilicity, and degradability. Following scaffold preparation, induced differentiated rabbit bone marrow mesenchymal stem cells (BMSCs) were seeded to evaluate scaffold cytocompatibility. Cell proliferation was observed in the two scaffold groups, and cell viability was analyzed using CCK-8 assay, scanning electron microscopy (SEM), and confocal microscopy. Histological staining was performed to comparatively study cell synthetic function. Subsequently, tissue reconstruction and regeneration were evaluated following subcutaneous implantation of gelatin/PLA/P(3HB-co-4HB) scaffolds loaded with induced differentiated BMSCs in the dorsal regions of athymic nude mice. Results demonstrated that the gelatin/PLA/P(3HB-co-4HB) scaffold exhibited good cell compatibility, providing a suitable microenvironment for cell proliferation and differentiation. Furthermore, the scaffold supported the growth of seeded induced differentiated rabbit MSCs in vivo, maintaining meniscus cell phenotyping and function. The cell-laden scaffold has the potential to generate meniscus fibrocartilage.

Schlagwörter

Stichwörter der Autor:innen

biocompatibilitymechanical strengthmeniscusstem celltissue engineering scaffold

Autor:innen und Institutionen

  • Department of Joint and Sports Medicine, The Second Hospital of Dalian Medical University, Dalian 116023, China.
  • College of Basic Medical Sciences, Dalian Medical University, No. 9 West Section, South Lvshun Road, Dalian 116044, China.
  • Department of Oral and Maxillofacial Surgery, School of Stomatology, Dalian Medical University, Dalian 116044, China.
  • College of Health-Preservation and Wellness, Dalian Medical University, No. 9 West Section, South Lvshun Road, Dalian 116044, China.

Förderung

  • "1+X" program for Clinical Competency Enhancement - Interdisciplinary Innovation Project, The Second Hospital of Dalian Medical University
  • “1+X” program for Clinical Competency Enhancement—Interdisciplinary Innovation Project, The Second Hospital of Dalian Medical University

Zitieren

APA

Li, P., Cheng, X., Li, W., Yang, H., & Jiang, Y. (2026). Differentiated Stem Cell-Seeded Gelatin/PLA/P(3HB-co-4HB) Meniscal Scaffold with Biocompatibility and Mechanical Strength. Polymers, 18(6), 774. https://doi.org/10.3390/polym18060774

Vancouver

Li P, Cheng X, Li W, Yang H, Jiang Y. Differentiated Stem Cell-Seeded Gelatin/PLA/P(3HB-co-4HB) Meniscal Scaffold with Biocompatibility and Mechanical Strength. Polymers. 2026;18(6):774. doi:10.3390/polym18060774

BibTeX
@article{Li2026,
  author = {Li, Peng and Cheng, Xiaoxin and Li, Wuwei and Yang, Haiqing and Jiang, Yubi},
  title = {Differentiated Stem Cell-Seeded Gelatin/PLA/P(3HB-co-4HB) Meniscal Scaffold with Biocompatibility and Mechanical Strength},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {6},
  pages = {774},
  doi = {10.3390/polym18060774}
}
Kostenlos starten →