EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Situ Growth of MIL-100(Fe) on Coconut Shell Activated Carbon for High-Efficiently Removal of Microplastics from Water

Qianyi Wang, Guohan Wang, Sasa Ma, Zichen Wang, Lijie Luo iD, Yongjun Chen iD

Polymers · 23.03.2026 · 18 (6) · 772

DOI: 10.3390/polym18060772 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.03.2026. Verfasst von Qianyi Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Engineering, School of Materials Science and Engineering, Hainan University, Haikou 570228, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The widespread use of plastics has inevitably led to the accumulation of persistent plastic debris in aquatic systems, where gradual fragmentation generates microplastics (MPs) that threaten ecological and biological health. Their small size, chemical stability, and resistance to degradation make effective removal particularly challenging. In this work, a composite adsorbent was fabricated through the in situ solvothermal growth of Materials of Institute Lavoisier 100 (Iron) (MIL-100(Fe)) onto coconut shell-derived activated carbon (CSAC), yielding a monolithic material denoted as CSAC@MIL-100(Fe). The integration of porous C with a metal–organic framework created a hierarchically structured adsorbent rich in accessible binding sites. The composite achieved a maximum polystyrene (PS) removal efficiency of 97.4% and maintained 91.44% efficiency after seven regeneration cycles. Stable adsorption performance was observed across a broad pH range. Structural and chemical analyses (scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS)) combined with adsorption modeling revealed heterogeneous multilayer adsorption behavior consistent with the Freundlich isotherm and pseudo-second-order kinetics. π–π interactions, electrostatic attraction, and coordination effects jointly governed PS capture. The Langmuir maximum adsorption capacity reached 746.27 mg/g. These findings demonstrate a practical and recyclable strategy for efficient MP remediation in aquatic environments.

Schlagwörter

Stichwörter der Autor:innen

MIL-100(Fe)coconut shell activated carbonmetal–organic frameworkpolystyreneremoval mechanism

Autor:innen und Institutionen

  • Department of Materials Engineering, School of Materials Science and Engineering, Hainan University, Haikou 570228, China.

ORCID-Profile: Lijie Luo, Yongjun Chen

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wang, Q., Wang, G., Ma, S., Wang, Z., Luo, L., & Chen, Y. (2026). In Situ Growth of MIL-100(Fe) on Coconut Shell Activated Carbon for High-Efficiently Removal of Microplastics from Water. Polymers, 18(6), 772. https://doi.org/10.3390/polym18060772

Vancouver

Wang Q, Wang G, Ma S, Wang Z, Luo L, Chen Y. In Situ Growth of MIL-100(Fe) on Coconut Shell Activated Carbon for High-Efficiently Removal of Microplastics from Water. Polymers. 2026;18(6):772. doi:10.3390/polym18060772

BibTeX
@article{Wang2026,
  author = {Wang, Qianyi and Wang, Guohan and Ma, Sasa and Wang, Zichen and Luo, Lijie and Chen, Yongjun},
  title = {In Situ Growth of MIL-100(Fe) on Coconut Shell Activated Carbon for High-Efficiently Removal of Microplastics from Water},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {6},
  pages = {772},
  doi = {10.3390/polym18060772}
}
Kostenlos starten →