EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Controlled Formation of Polyimide Aerogel Networks in Carbon Fiber Felt via Multicycle Freeze-Drying for Thermal Protection

Jae Won Lee iD, Han Kim, Yong-Ho Choa, Sook Young Moon iD

Polymers · 18.03.2026 · 18 (6) · 742

DOI: 10.3390/polym18060742 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 18.03.2026. Verfasst von Jae Won Lee und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Advanced Composite Materials, Korea Institute of Science and Technology (KIST), Chudong-Ro 92, Bongdong-Eup, Wanju-Gun 55324, Jeonbuk, R…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MOTIE/KEIT, Korea Institute of Science and Technology, ITECH R&D program of MOTIE/KEIT.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fiber-reinforced aerogel composites are attractive for thermal protection applications because porous polymer networks can suppress heat transfer while maintaining structural stability. In this study, carbon fiber felt was integrated with a polyimide aerogel via a freeze-drying-assisted multicycle impregnation process to achieve controlled formation of interconnected aerogel networks within the fibrous scaffold. With increasing impregnation cycles, the composites exhibited progressive microstructural densification and improved structural stability. Although bulk density increased, thermal protection performance under prolonged butane-torch exposure was significantly enhanced, showing delayed backside temperature rise and improved resistance to structural degradation compared with bare carbon felt. Post-ablation analyses revealed the formation of a micro-/nanoporous polymer-derived char layer and a multilayer thermal-resistance structure, which contributed to suppressed heat transfer during flame exposure. These results indicate that effective thermal protection in CF/PA composites is governed by dynamic microstructural evolution and char-layer formation rather than intrinsic room-temperature thermal conductivity alone. The proposed multicycle impregnation strategy provides a scalable approach for designing lightweight polymer-based thermal protection materials operating in high-temperature environments.

Schlagwörter

Stichwörter der Autor:innen

carbon fiber/polyimide aerogel compositesmicrostructure controlmulticycle impregnationpolyimide-derived char layerthermal protection

Autor:innen und Institutionen

  • Institute of Advanced Composite Materials, Korea Institute of Science and Technology (KIST), Chudong-Ro 92, Bongdong-Eup, Wanju-Gun 55324, Jeonbuk, Republic of Korea.
  • Department of Materials Science and Chemical Engineering, Hanyang University, Ansan-si 15588, Gyeonggi-do, Republic of Korea.

ORCID-Profile: Jae Won Lee, Sook Young Moon

Förderung

  • MOTIE/KEIT
  • Korea Institute of Science and Technology
  • ITECH R&D program of MOTIE/KEIT

Zitieren

APA

Lee, J. W., Kim, H., Choa, Y. H., & Moon, S. Y. (2026). Controlled Formation of Polyimide Aerogel Networks in Carbon Fiber Felt via Multicycle Freeze-Drying for Thermal Protection. Polymers, 18(6), 742. https://doi.org/10.3390/polym18060742

Vancouver

Lee JW, Kim H, Choa YH, Moon SY. Controlled Formation of Polyimide Aerogel Networks in Carbon Fiber Felt via Multicycle Freeze-Drying for Thermal Protection. Polymers. 2026;18(6):742. doi:10.3390/polym18060742

BibTeX
@article{Lee2026,
  author = {Lee, Jae Won and Kim, Han and Choa, Yong-Ho and Moon, Sook Young},
  title = {Controlled Formation of Polyimide Aerogel Networks in Carbon Fiber Felt via Multicycle Freeze-Drying for Thermal Protection},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {6},
  pages = {742},
  doi = {10.3390/polym18060742}
}
Kostenlos starten →