EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Cellulose Acetate-Based Membrane Doped with Plasticizer for High-Efficiency Separation of CO2

Jin Li, Zhongyong Su, Tiantian Jia, Kai Liu, Liulian Huang, Fang Huang, Xiaolin Luo iD, Jianguo Li iD, Qingxian Miao

Polymers · 18.03.2026 · 18 (6) · 740

DOI: 10.3390/polym18060740 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 18.03.2026. Verfasst von Jin Li und 8 weiteren Autor:innen. Beteiligte Einrichtung: College of Material Engineering, Fujian Agriculture and Forestry University, Fuzhou 350002, China. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fujian Agriculture and Forestry University, innovative funding of Fujian Agriculture and Forestry University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

It is essential to develop a practical technology for the separation and capture of carbon dioxide (CO2) due to the gradually increased concentration of CO2 in the atmosphere, which has driven the rise in global temperature. Membrane separation is regarded as a promising technology for the capture of CO2. However, most membranes employ non-biodegradable petroleum-based polymers. In this study, biodegradable and renewable membranes of cellulose acetate (CA) doped with polyethylene glycol (PEG) and polyethylene glycol diacrylate (PEGDA) were fabricated by solution casting and used for the separation of CO2/O2. The results indicated that the membrane doped with PEGDA exhibited higher permeability of CO2 and selectivity of CO2/O2 compared to those doped with PEG, while improving the tensile strain and structural uniformity of membranes. The membrane with a thickness of 25 μm at a PEGDA dosage of 10 wt% achieved optimal gas permeability, selectivity, and mechanical toughness, showing CO2 permeability of 4.59 Barrer and CO2/O2 selectivity of 5.68. The structure of the interpenetrating polymer network was responsible for the excellent properties of the membrane doped with PEGDA due to the formation of more mid- and micro-sized pores that increase the diffusion pathways of CO2.

Schlagwörter

Stichwörter der Autor:innen

cellulose acetategas permeabilitygas separationmembraneselectivity

Autor:innen und Institutionen

  • College of Material Engineering, Fujian Agriculture and Forestry University, Fuzhou 350002, China.

ORCID-Profile: Xiaolin Luo, Jianguo Li

Förderung

  • Fujian Agriculture and Forestry University
  • innovative funding of Fujian Agriculture and Forestry University

Zitieren

APA

Li, J., Su, Z., Jia, T., Liu, K., Huang, L., Huang, F., Luo, X., Li, J., & Miao, Q. (2026). Fabrication of Cellulose Acetate-Based Membrane Doped with Plasticizer for High-Efficiency Separation of CO2. Polymers, 18(6), 740. https://doi.org/10.3390/polym18060740

Vancouver

Li J, Su Z, Jia T, Liu K, Huang L, Huang F, et al. Fabrication of Cellulose Acetate-Based Membrane Doped with Plasticizer for High-Efficiency Separation of CO2. Polymers. 2026;18(6):740. doi:10.3390/polym18060740

BibTeX
@article{Li2026,
  author = {Li, Jin and Su, Zhongyong and Jia, Tiantian and Liu, Kai and Huang, Liulian and Huang, Fang and Luo, Xiaolin and Li, Jianguo and Miao, Qingxian},
  title = {Fabrication of Cellulose Acetate-Based Membrane Doped with Plasticizer for High-Efficiency Separation of CO2},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {6},
  pages = {740},
  doi = {10.3390/polym18060740}
}
Kostenlos starten →