EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Agro-Industrial Biowaste Valorisation by Engineering Controlled-Release Polyphenol Products for Applications in Sustainable Agriculture

Fabrizio De Cesare iD, Simone Serrecchia iD, Gabriella Di Carlo iD, Cristina Riccucci iD, Gianmarco Alfieri iD, Andrea Bellincontro iD, Sarai Agustin-Salazar iD, Gabriella Santagata iD, Paolo Papa iD, Antonella Macagnano iD

Polymers · 16.03.2026 · 18 (6) · 715

DOI: 10.3390/polym18060715 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 16.03.2026. Verfasst von Fabrizio De Cesare und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department for Innovation in Biological, AgriFood and Forest Systems (DIBAF), University of Tuscia, 01100 Viterbo, Italy. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 117 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Council (CNR), Project "TERRE"-Strategic Research Projects@CNR 2020-2022, National Research Council, Italian Ministry of University and Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrospinning and electrospraying nanotechnologies were used to valorise agro-industrial residues into biohybrid controlled-release polyphenol (CRP) scaffolds. Four polyhydroxybutyrate ± polycaprolactone (PHB±PCL) architectures were fabricated that differed in polymer phase, Klason lignin from hazelnut shell (HS-KL) presence vs. absence, and co-location with grape-pomace polyphenols (GP-PPs), as well as in distribution between fibres and bead-like depots. Scaffolds were characterised using optical microscopy/stereomicroscopy/SEM, FTIR, UV–Vis spectroscopy, and dynamic water contact angle (absorption). GP-PP release was monitored for 14 days at ~25 °C and 37 °C, the latter representing shallow-soil hot-spell conditions in Mediterranean zones. All matrices exhibited multimodal release, with modest initial bursts and three phases (burst, mid, and late tail), analogous to controlled-release fertiliser profiles. At ~25 °C, the PHB/PCL matrix with HS-KL confined to PHB fibres and GP-PP in large PCL beads showed the highest total GP-PP release, whereas the architecture with HS-KL and GP-PP co-located in both PHB and PCL fibres and in PCL depots combined high total release with a smoother, well-metered late phase. At 37 °C, this HS-KL-GP-PP co-located scaffold was the most robust, retaining the highest total and late tail release. These results identify HS-KL-GP-PP co-located PHB/PCL architectures as promising carriers for temperature-resilient delivery of bioactive polyphenols in Mediterranean agrosystems.

Schlagwörter

Stichwörter der Autor:innen

agro-industrial wastedrug deliveryelectrospinningelectrosprayingligninpolycaprolactone (PCL)polyhydroxybutyrate (PHB)polyphenols

Autor:innen und Institutionen

  • Department for Innovation in Biological, AgriFood and Forest Systems (DIBAF), University of Tuscia, 01100 Viterbo, Italy.
  • Institute of Atmospheric Pollution Research (IIA), National Research Council (CNR), 00010 Montelibretti, Italy.
  • Department of Chemical, Materials and Industrial Production Engineering (DICMAPI), University of Naples Federico II, 80125 Naples, Italy.
  • Institute for the Study of Nanostructured Materials (ISMN), National Research Council (CNR), 00010 Montelibretti, Italy.
  • Institute of Polymers, Composites and Biomaterials (IPCB), National Research Council (CNR), 80078 Pozzuoli, Italy.

ORCID-Profile: Fabrizio De Cesare, Simone Serrecchia, Gabriella Di Carlo, Cristina Riccucci, Gianmarco Alfieri, Andrea Bellincontro, Sarai Agustin-Salazar, Gabriella Santagata, Paolo Papa, Antonella Macagnano

Förderung

  • National Research Council (CNR), Project "TERRE"-Strategic Research Projects@CNR 2020-2022
  • National Research Council
  • Italian Ministry of University and Research

Zitieren

APA

De Cesare, F., Serrecchia, S., Di Carlo, G., Riccucci, C., Alfieri, G., Bellincontro, A., Agustin-Salazar, S., Santagata, G., Papa, P., & Macagnano, A. (2026). Agro-Industrial Biowaste Valorisation by Engineering Controlled-Release Polyphenol Products for Applications in Sustainable Agriculture. Polymers, 18(6), 715. https://doi.org/10.3390/polym18060715

Vancouver

De Cesare F, Serrecchia S, Di Carlo G, Riccucci C, Alfieri G, Bellincontro A, et al. Agro-Industrial Biowaste Valorisation by Engineering Controlled-Release Polyphenol Products for Applications in Sustainable Agriculture. Polymers. 2026;18(6):715. doi:10.3390/polym18060715

BibTeX
@article{DeCesare2026,
  author = {De Cesare, Fabrizio and Serrecchia, Simone and Di Carlo, Gabriella and Riccucci, Cristina and Alfieri, Gianmarco and Bellincontro, Andrea and Agustin-Salazar, Sarai and Santagata, Gabriella and Papa, Paolo and Macagnano, Antonella},
  title = {Agro-Industrial Biowaste Valorisation by Engineering Controlled-Release Polyphenol Products for Applications in Sustainable Agriculture},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {6},
  pages = {715},
  doi = {10.3390/polym18060715}
}
Kostenlos starten →