EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biodegradability of Binder System Waste from Hydroxyl-Terminated Polybutadiene Propellant and Pretreatment for Biodegradation

Kai Wu, Tao Chai, Fei Hu, Zhengmao Ding iD, Chao Wang

Polymers · 13.03.2026 · 18 (6) · 706

DOI: 10.3390/polym18060706 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 13.03.2026. Verfasst von Kai Wu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Frontier Cross-Disciplinary Research Center for Explosive Science and Microevidence Technology, Shanxi Police College, Taiyuan 030051, China. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shanxi Province Science and Technology Major Projects, Shanxi Key Laboratory of Efficient Hydrogen Storage & Production Technology, Shanxi Science and Technology Innovation Talent Team, Shanxi Provincial Higher Education Institutions Scientific and Technological Innovation Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Large amounts of binder system waste are produced upon the recovery of energetic components in scrapped hydroxyl-terminated polybutadiene (HTPB) propellant. This study investigated the biodegradability of the binder system waste using a microbial enrichment solution as the biodegradation medium. We measured the binder system weight loss and performed Fourier-transform infrared (FT-IR), thermogravimetric (TG), and scanning electron microscopy (SEM) analyses of the binder system after 60 days of biodegradation. The results show the binder system film weight decreased by approximately 43% and stabilized after 50 days. The FT-IR analysis shows a reduction in C=O and C-O bond signals, whereas N-H, C-N, and C=C bond signals remain nearly unchanged. The TG analysis shows that the difference between the DOA weight in the initial film and that of the thermal decomposition was almost equal to the weight loss of the binder system film after biodegradation. The SEM analysis shows irregular pits on the film. The binder system has a certain biodegradability, which is mainly caused by its plasticizer component, i.e., DOA. HTPB-based polyurethane, the other major component, is difficult to degrade by microorganisms. As such, the binder system was pretreated with sodium methoxide-methanol solution as a depolymerization reagent, and the pretreated product yielded higher biodegradability.

Schlagwörter

Stichwörter der Autor:innen

HTPB binder systemHTPB-based polyurethanebiodegradabilitydepolymerizationpretreatment

Autor:innen und Institutionen

  • Frontier Cross-Disciplinary Research Center for Explosive Science and Microevidence Technology, Shanxi Police College, Taiyuan 030051, China.
  • School of Environment and Safety Engineering, North University of China, Taiyuan 030051, China.
  • Pen-Tung Sah Institute of Micro-Nano Science and Technology, Xiamen University, Xiamen 361005, China.

ORCID-Profile: Zhengmao Ding

Förderung

  • Shanxi Province Science and Technology Major Projects
  • Shanxi Key Laboratory of Efficient Hydrogen Storage & Production Technology, Shanxi Science and Technology Innovation Talent Team
  • Shanxi Provincial Higher Education Institutions Scientific and Technological Innovation Project

Zitieren

APA

Wu, K., Chai, T., Hu, F., Ding, Z., & Wang, C. (2026). Biodegradability of Binder System Waste from Hydroxyl-Terminated Polybutadiene Propellant and Pretreatment for Biodegradation. Polymers, 18(6), 706. https://doi.org/10.3390/polym18060706

Vancouver

Wu K, Chai T, Hu F, Ding Z, Wang C. Biodegradability of Binder System Waste from Hydroxyl-Terminated Polybutadiene Propellant and Pretreatment for Biodegradation. Polymers. 2026;18(6):706. doi:10.3390/polym18060706

BibTeX
@article{Wu2026,
  author = {Wu, Kai and Chai, Tao and Hu, Fei and Ding, Zhengmao and Wang, Chao},
  title = {Biodegradability of Binder System Waste from Hydroxyl-Terminated Polybutadiene Propellant and Pretreatment for Biodegradation},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {6},
  pages = {706},
  doi = {10.3390/polym18060706}
}
Kostenlos starten →