EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Eco-Friendly Copper Oxide Nanoparticles Incorporated Polyvinylidene Difluoride Electrospun Nanofibers as Wearable Piezoelectric Nanogenerator

Amrutha Bindhu, Sathiyanathan Ponnan iD, Shamim Reza Mohammad, Riya Karmakar iD, Hongdoo Kim, Arvind Mukundan iD, Anand Prabu Arun iD

Polymers · 13.03.2026 · 18 (6) · 699

DOI: 10.3390/polym18060699 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 13.03.2026. Verfasst von Amrutha Bindhu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, School of Advanced Sciences, Vellore Institute of Technology, Vellore 632014, India. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Government of India.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on enhancing the performance of piezoelectric nanogenerators (PENGs) fabricated by electrospinning (ES) of polyvinylidene fluoride (PVDF) infused with varying concentrations (0, 1, 3, 5, and 7 wt.-%) of copper oxide (CuO) nanoparticles. Structural changes and the β-phase proportion in nanofibers (NFs) were examined using XRD and FTIR-ATR. Surface morphology and roughness were characterized using FE-SEM and AFM, respectively. The water-repellent characteristics of the NFs were assessed through WCA measurements. Electrical output (voltage and current) was evaluated under mechanical pressure using a customized setup that applied 1.0 kgf at 1.0 Hz. The pristine PVDF-based PENG generated an output of 1.7 V and 0.53 μA, while the composite NF with 5 wt.-% CuO (5PCu) delivered a significantly enhanced output of 13.7 V and 1.6 μA. The 5PCu device was further tested for detecting human activities, including tapping, wrist movements, walking, and jumping, thereby demonstrating its potential for self-powered wearable electronics.

Schlagwörter

Stichwörter der Autor:innen

CuOPVDFnanofiberpiezoelectric nanogeneratorwearable sensors

Autor:innen und Institutionen

  • Department of Chemistry, School of Advanced Sciences, Vellore Institute of Technology, Vellore 632014, India.
  • Department of Chemistry, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai 600062, India.
  • Department of Materials Science and Engineering, College of Engineering, Kyung Hee University, Yongin-si 17104, Gyeonggi-do, Republic of Korea.
  • School of Engineering and Technology, Sanjivani University, Sanjivani Factory, Kopargaon 423603, India.
  • Department of Biomedical Imaging, Chennai Institute of Technology, Chennai 600069, India.

ORCID-Profile: Sathiyanathan Ponnan, Riya Karmakar, Arvind Mukundan, Anand Prabu Arun

Förderung

  • Ministry of Education, Government of India

Zitieren

APA

Bindhu, A., Ponnan, S., Mohammad, S. R., Karmakar, R., Kim, H., Mukundan, A., & Arun, A. P. (2026). Eco-Friendly Copper Oxide Nanoparticles Incorporated Polyvinylidene Difluoride Electrospun Nanofibers as Wearable Piezoelectric Nanogenerator. Polymers, 18(6), 699. https://doi.org/10.3390/polym18060699

Vancouver

Bindhu A, Ponnan S, Mohammad SR, Karmakar R, Kim H, Mukundan A, et al. Eco-Friendly Copper Oxide Nanoparticles Incorporated Polyvinylidene Difluoride Electrospun Nanofibers as Wearable Piezoelectric Nanogenerator. Polymers. 2026;18(6):699. doi:10.3390/polym18060699

BibTeX
@article{Bindhu2026,
  author = {Bindhu, Amrutha and Ponnan, Sathiyanathan and Mohammad, Shamim Reza and Karmakar, Riya and Kim, Hongdoo and Mukundan, Arvind and Arun, Anand Prabu},
  title = {Eco-Friendly Copper Oxide Nanoparticles Incorporated Polyvinylidene Difluoride Electrospun Nanofibers as Wearable Piezoelectric Nanogenerator},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {6},
  pages = {699},
  doi = {10.3390/polym18060699}
}
Kostenlos starten →