EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multistage Thermal Decomposition Kinetics of Glycidyl Azide Polymer-Based Thermoplastic Elastomers: A Constrained Deconvolution Approach

Zhu Wang, Haoyu Yu iD, Shanjun Ding iD, Wenhao Liu, Shuai Zhao, Yunjun Luo iD

Polymers · 09.03.2026 · 18 (5) · 666

DOI: 10.3390/polym18050666 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 09.03.2026. Verfasst von Zhu Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Glycidyl azide polymer (GAP)-based polyurethane, a kind of energetic thermoplastic elastomer (ETPE), is a promising binder for advanced solid propellants, but its thermal decomposition involves overlapping competitive reactions that conventional single-step kinetic models cannot characterize accurately, limiting its engineering applications. To address this limitation, a constrained asymmetric Gaussian deconvolution strategy with fixed peak area ratios and shape constraints was developed in this work. This strategy was applied to resolve overlapping reaction rate curves converted from derivative thermogravimetric data of GAP-based ETPEs with 50 wt% GAP content at four heating rates of 5, 10, 15 and 20 K·min−1. The complex decomposition process was successfully split into five stages, assigned to azide cleavage, polyether backbone scission, carbamate cleavage, hydrocarbon product degradation and residue decomposition, with a goodness of fit of R2 > 0.998. Apparent activation energies of the five stages were determined through cross-validation by the Friedman and Flynn–Wall–Ozawa methods without prior assumption of reaction mechanisms, following the order of residue decomposition (181.4 ± 1.0 kJ·mol−1) > hydrocarbon product degradation (159.9 ± 1.0 kJ·mol−1) ≈ azide cleavage (156.5 ± 0.6 kJ·mol−1) > backbone scission (135.1 ± 0.7 kJ·mol−1) > carbamate cleavage (111.9 ± 1.1 kJ·mol−1). Pre-exponential factors with lnA0 values ranging from 22.2 to 34.0 were derived via the kinetic compensation effect. Finally, generalized master plots were employed to compare with classic solid-state reaction models for mechanistic insight, and the Šesták–Berggren model fit three major stages excellently (R2 > 0.996) by accounting for synergistic nucleation-growth and phase boundary mechanisms, enabling high-precision kinetic equations. It should be noted that the constrained deconvolution method proposed in this work has general applicability for kinetic analysis of GAP-based ETPEs with different formulations and other complex energetic polymer systems, while the obtained kinetic parameters are composition-specific and only applicable to the corresponding ETPE formulation studied herein.

Schlagwörter

Stichwörter der Autor:innen

activation energyasymmetric gaussian functionconstrained deconvolutionglycidyl azide polymerpre-exponential factorthermal decomposition

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China.
  • AVIC Manufacturing Technology Institute, Beijing 100024, China.
  • Key Laboratory for Ministry of Education of High Energy Density Materials, Ministry of Education, Beijing Institute of Technology, Beijing 100081, China.

ORCID-Profile: Haoyu Yu, Shanjun Ding, Yunjun Luo

Zitieren

APA

Wang, Z., Yu, H., Ding, S., Liu, W., Zhao, S., & Luo, Y. (2026). Multistage Thermal Decomposition Kinetics of Glycidyl Azide Polymer-Based Thermoplastic Elastomers: A Constrained Deconvolution Approach. Polymers, 18(5), 666. https://doi.org/10.3390/polym18050666

Vancouver

Wang Z, Yu H, Ding S, Liu W, Zhao S, Luo Y. Multistage Thermal Decomposition Kinetics of Glycidyl Azide Polymer-Based Thermoplastic Elastomers: A Constrained Deconvolution Approach. Polymers. 2026;18(5):666. doi:10.3390/polym18050666

BibTeX
@article{Wang2026,
  author = {Wang, Zhu and Yu, Haoyu and Ding, Shanjun and Liu, Wenhao and Zhao, Shuai and Luo, Yunjun},
  title = {Multistage Thermal Decomposition Kinetics of Glycidyl Azide Polymer-Based Thermoplastic Elastomers: A Constrained Deconvolution Approach},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {5},
  pages = {666},
  doi = {10.3390/polym18050666}
}
Kostenlos starten →