EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structure–Property Relationships in Cyanate Ester Composites Incorporating BaTiO3 and Transparent Glass Fillers

Caner Başaran, Neslihan Tamsü Selli iD

Polymers · 09.03.2026 · 18 (5) · 664

DOI: 10.3390/polym18050664 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 09.03.2026. Verfasst von Caner Başaran und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Gebze Technical University, 41400 Kocaeli, Turkey. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Aselsan (Turkey), Gebze Technical University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer–ceramic composites based on cyanate ester resins have attracted increasing attention for high-frequency electronic applications due to their low dielectric loss, thermal stability, and dimensional reliability; however, achieving a targeted dielectric constant while maintaining low loss remains a key challenge. In this study, transparent glass powders and BaTiO3 ceramic fillers were incorporated into a cyanate ester matrix to systematically investigate structure–property relationships and optimize dielectric performance for antenna-related applications. Transparent glass powders were synthesized via a melt-quenching route and combined with submicron BaTiO3 particles, while both fillers were surface-modified using 3-triethoxysilylpropyl isocyanate (TESPI) to enhance interfacial compatibility. Composite samples containing 5–30 wt% total filler were fabricated and characterized by XRD, FTIR, tensile testing, dielectric measurements, and SEM/EDX analyses. The results demonstrate that TESPI surface modification promotes strong interfacial bonding and homogeneous filler dispersion within the cyanate ester matrix. An optimal balance between mechanical integrity and dielectric performance was achieved at 15 wt% total filler loading (K3), exhibiting a dielectric constant close to 10 and the lowest dielectric loss (tan δ ≈ 0.0047 at 1 MHz). Microstructural observations confirm that excessive filler loading leads to agglomeration and increased dielectric loss. Overall, the combined use of transparent glass and BaTiO3 fillers, together with effective interfacial engineering, enables precise tuning of dielectric properties in cyanate ester composites for high-frequency electronic applications.

Schlagwörter

Stichwörter der Autor:innen

BaTiO3cyanate ester compositesdielectric propertiesinorganic powdersinterfacial modificationtransparent glass filler

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Gebze Technical University, 41400 Kocaeli, Turkey.
  • ASELSAN A.Ş, 06200 Ankara, Turkey.

ORCID-Profile: Neslihan Tamsü Selli

Förderung

  • Aselsan (Turkey)
  • Gebze Technical University

Zitieren

APA

Başaran, C., & Selli, N. T. (2026). Structure–Property Relationships in Cyanate Ester Composites Incorporating BaTiO3 and Transparent Glass Fillers. Polymers, 18(5), 664. https://doi.org/10.3390/polym18050664

Vancouver

Başaran C, Selli NT. Structure–Property Relationships in Cyanate Ester Composites Incorporating BaTiO3 and Transparent Glass Fillers. Polymers. 2026;18(5):664. doi:10.3390/polym18050664

BibTeX
@article{Baaran2026,
  author = {Başaran, Caner and Selli, Neslihan Tamsü},
  title = {Structure–Property Relationships in Cyanate Ester Composites Incorporating BaTiO3 and Transparent Glass Fillers},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {5},
  pages = {664},
  doi = {10.3390/polym18050664}
}
Kostenlos starten →