Multi-Objective Optimization of the Dry Towpreg Filament Winding Process for Carbon/Epoxy Type IV Hydrogen Storage Vessels
Polymers · 05.03.2026 · 18 (5) · 639
DOI: 10.3390/polym18050639 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 05.03.2026. Verfasst von Ruiqi Li und 10 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Postdoctoral Science Foundation, Hubei Province Key Research and Development Plan, Foshan Xianhu Laboratory Project.
Abstract (Originalsprache)
Hydrogen storage vessels are critical components in hydrogen energy systems, and improving their manufacturing efficiency and structural performance is essential for next-generation Type IV vessel designs. Compared with conventional wet filament winding, towpreg dry filament winding offers higher efficiency, reduced environmental impact, and better adaptability to complex structures. In this study, key process parameters, including winding tension, heating temperature, and winding speed were systematically optimized using the tensile strength and interlaminar shear strength of NOL ring specimens as evaluation metrics. A response surface methodology (RSM) regression model was established to correlate process variables with mechanical properties, followed by multi-objective optimization using the non-dominated sorting genetic algorithm II (NSGA-II) and final parameter selection through the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) method. The results indicate that shear strength is primarily affected by heating temperature, whereas tensile strength is mainly governed by winding tension. The optimal parameter combination (79 N, 360 °C, and 11 m/min) yielded tensile and shear strengths of 2462.2 MPa and 64.4 MPa, respectively, with prediction errors below 0.5%. A 9 L Type IV hydrogen storage vessel manufactured under these conditions showed approximately 15.4% lower mass and about 17% higher gravimetric hydrogen storage efficiency than a comparable wet wound vessel.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China.
- National Energy Key Laboratory for New Hydrogen-Ammonia Energy Technologies, Foshan Xianhu Laboratory, Foshan 528200, China.
- Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics, School of Physics and Mechanics, Wuhan University of Technology, Wuhan 430070, China.
ORCID-Profile: Ruiqi Li, Kaidong Zheng, Hongda Chen, Shuxin Li
Förderung
- China Postdoctoral Science Foundation
- Hubei Province Key Research and Development Plan
- Foshan Xianhu Laboratory Project
- National Natural Science Foundation of China
- National Key R&D Program of China
Zitieren
APA
Li, R., Zheng, K., Yan, X., Liu, H., Zhang, Y., Huo, G., Hu, H., Cao, D., Li, H., Chen, H., & Li, S. (2026). Multi-Objective Optimization of the Dry Towpreg Filament Winding Process for Carbon/Epoxy Type IV Hydrogen Storage Vessels. Polymers, 18(5), 639. https://doi.org/10.3390/polym18050639
Vancouver
Li R, Zheng K, Yan X, Liu H, Zhang Y, Huo G, et al. Multi-Objective Optimization of the Dry Towpreg Filament Winding Process for Carbon/Epoxy Type IV Hydrogen Storage Vessels. Polymers. 2026;18(5):639. doi:10.3390/polym18050639
BibTeX
@article{Li2026,
author = {Li, Ruiqi and Zheng, Kaidong and Yan, Xiaoyu and Liu, Haonan and Zhang, Yu and Huo, Guangming and Hu, Haixiao and Cao, Dongfeng and Li, Hao and Chen, Hongda and Li, Shuxin},
title = {Multi-Objective Optimization of the Dry Towpreg Filament Winding Process for Carbon/Epoxy Type IV Hydrogen Storage Vessels},
journal = {Polymers},
year = {2026},
volume = {18},
number = {5},
pages = {639},
doi = {10.3390/polym18050639}
}
EUVIMED