EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and Numerical Investigation of Mechanical Properties of Hyper Polylactic Acid (HPLA)

Mariana Domnica Stanciu iD, Horațiu Drăghicescu Teodorescu iD, Ionuț Teșulă, Sergiu Valeriu Georgescu iD, Florin Dinulică iD

Polymers · 03.03.2026 · 18 (5) · 624

DOI: 10.3390/polym18050624 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 03.03.2026. Verfasst von Mariana Domnica Stanciu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Transilvania University of Brașov, B-dul Eroilor 29, 500036 Brașov, Romania. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polylactic acid (PLA) is one of the most widely used materials for fused filament fabrication (FFF) or fused deposition modeling (FDM), being recognized for its low carbon footprint, relatively low costs and good mechanical properties. Improving the mechanical and technological properties of PLA with various additives has led to the production of different types of PLA-based filaments, such as hyper PLA (HPLA), PLA, PLA+ and PLA Lite. Studies on the mechanical properties of HPLA are scarce; therefore, the objective of this paper was to determine the mechanical properties of 3D-printed HPLA under tensile and bending stress conditions and to obtain numerical models that depend on the raster pattern orientation. The principal component analysis (PCA) reveals very different results for bending compared with tension, with outcomes varying significantly depending on the orientation of the raster angle.

Schlagwörter

Stichwörter der Autor:innen

finite element analysishyper polylactic acidmechanical propertiesraster angle orientation

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Transilvania University of Brașov, B-dul Eroilor 29, 500036 Brașov, Romania.
  • Schaeffler România, Aleea Schaeffler 3, 507055 Cristian, Brașov, Romania.
  • Department of Wood Processing and Design of Wood Products, Transilvania University of Brașov, B-dul Eroilor 29, 500036 Brașov, Romania.
  • Faculty of Silviculture and Forest Engineering, Transilvania University of Brașov, B-dul Eroilor 29, 500036 Brașov, Romania.

ORCID-Profile: Mariana Domnica Stanciu, Horațiu Drăghicescu Teodorescu, Sergiu Valeriu Georgescu, Florin Dinulică

Zitieren

APA

Stanciu, M. D., Drăghicescu Teodorescu, H., Teșulă, I., Georgescu, S. V., & Dinulică, F. (2026). Experimental and Numerical Investigation of Mechanical Properties of Hyper Polylactic Acid (HPLA). Polymers, 18(5), 624. https://doi.org/10.3390/polym18050624

Vancouver

Stanciu MD, Drăghicescu Teodorescu H, Teșulă I, Georgescu SV, Dinulică F. Experimental and Numerical Investigation of Mechanical Properties of Hyper Polylactic Acid (HPLA). Polymers. 2026;18(5):624. doi:10.3390/polym18050624

BibTeX
@article{Stanciu2026,
  author = {Stanciu, Mariana Domnica and Drăghicescu Teodorescu, Horațiu and Teșulă, Ionuț and Georgescu, Sergiu Valeriu and Dinulică, Florin},
  title = {Experimental and Numerical Investigation of Mechanical Properties of Hyper Polylactic Acid (HPLA)},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {5},
  pages = {624},
  doi = {10.3390/polym18050624}
}
Kostenlos starten →