EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Hot-Pressing Temperature on β-Phase Formulation in 3D-Printed Polyvinylidene Fluoride (PVDF)

Sadia Rahman Toru iD, Imjoo Jung iD, Sunhee Lee iD

Polymers · 28.02.2026 · 18 (5) · 617

DOI: 10.3390/polym18050617 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 28.02.2026. Verfasst von Sadia Rahman Toru und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Fashion and Textiles, Dong-A University, Busan 49315, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and ICT.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The purpose of this study is to combine 3D printing and hot-pressing to improve polyvinylidene fluoride (PVDF) by making its surface smoother, enhancing crystallinity and electrical and mechanical performance. Before printing, PVDF filament was analyzed using rheology, differential scanning calorimetry (DSC), Thermogravimetric Analysis (TGA), and extrusion tests. Based on these results for printing, 250 °C was fixed as the optimized printing temperature. PVDF samples were printed using an Ultimaker S5 dual-nozzle 3D printer, with a size of 30 × 30 × 0.2 mm3. After printing, samples were hot-pressed at five different temperatures, 100, 125, 150, 175, and 200 °C, for 10 min each. Then, the hot-pressed samples were tested using morphology, Fourier transform infrared (FTIR), X-ray diffraction (XRD), DSC, tensile, and electrical properties. From the morphology, the sample thickness decreased from 0.25 to 0.24 mm, making the surface smoother, removing pores after hot-pressing. From FTIR and XRD results, all samples showed similar patterns, but the hot-pressed sample showed slightly stronger β-phase diffraction and peaks near 20° and 840, 1066, and 1275 cm−1, indicating better crystal ordering. The DSC results showed a small increase in melting temperature and stable thermal behavior after hot-pressing, confirming improved thermal stability. The tensile property results confirmed that the hot-pressed samples, around 150 and 175, showed higher strength and better flexibility. The electrical I-V test showed stable and uniform conductivity, and the hot-pressed samples performed more consistently. Overall, hot-pressing improved the surface quality, crystallinity, mechanical, and electrical properties of 3D-printed PVDF, making it more reliable for advanced applications.

Schlagwörter

Stichwörter der Autor:innen

crystallinityelectrical propertyfused deposition modeling (FDM) 3D printerhot-pressingmechanical strengthpolyvinylidene fluoride (PVDF)

Autor:innen und Institutionen

  • Department of Fashion and Textiles, Dong-A University, Busan 49315, Republic of Korea.
  • Department of Fashion Design, Dong-A University, Busan 49315, Republic of Korea.

ORCID-Profile: Sadia Rahman Toru, Imjoo Jung, Sunhee Lee

Förderung

  • Ministry of Science and ICT

Zitieren

APA

Toru, S. R., Jung, I., & Lee, S. (2026). Effect of Hot-Pressing Temperature on β-Phase Formulation in 3D-Printed Polyvinylidene Fluoride (PVDF). Polymers, 18(5), 617. https://doi.org/10.3390/polym18050617

Vancouver

Toru SR, Jung I, Lee S. Effect of Hot-Pressing Temperature on β-Phase Formulation in 3D-Printed Polyvinylidene Fluoride (PVDF). Polymers. 2026;18(5):617. doi:10.3390/polym18050617

BibTeX
@article{Toru2026,
  author = {Toru, Sadia Rahman and Jung, Imjoo and Lee, Sunhee},
  title = {Effect of Hot-Pressing Temperature on β-Phase Formulation in 3D-Printed Polyvinylidene Fluoride (PVDF)},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {5},
  pages = {617},
  doi = {10.3390/polym18050617}
}
Kostenlos starten →