Copolymer Engineering of Elastic–Rigid Elastomers for Wash-Durable Conductive Pastes in Wearable Textile Electronics
Polymers · 28.02.2026 · 18 (5) · 609
DOI: 10.3390/polym18050609 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 28.02.2026. Verfasst von Shang-Chih Chou und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Emerging Technology Research, Taiwan Textile Research Institute, New Taipei City 236003, Taiwan. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council.
Abstract (Originalsprache)
Smart textiles require conductive materials that maintain electrical stability under repeated mechanical deformation and laundering while preserving textile-like flexibility. In this work, an elastic–rigid copolymer elastomer was designed as a polymer binder for washable conductive pastes used in wearable textile electronics. The copolymer was synthesized using polytetramethylene ether glycol (PTMEG), 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA), and m-xylylene diisocyanate (XDI), enabling the incorporation of thermally stable imide segments and elastic polyurethane domains within a single polymer framework. By adjusting the molar ratio between rigid and soft segments, the resulting copolymer exhibited balanced tensile strength, Young’s modulus, and elastic recovery, outperforming a commercial thermoplastic polyurethane in mechanical performance. Silver-filled conductive pastes were prepared by dispersing 62 wt% micrometer-sized silver flakes into the copolymer matrix, achieving a bulk resistivity of 3.5 × 10−5 Ω·cm. The printed conductive films showed stable electrical resistivity under cyclic tensile deformation up to 20% strain. Washing durability was further evaluated following the AATCC 135 top-loading laundering standard. After 50 laundering cycles, the resistance increase remained within 2.8–5.5 Ω for knitted fabrics and 2.0–5.1 Ω for woven fabrics, indicating satisfactory electrical stability and adhesion to textile substrates. These results suggest that elastic–rigid copolymer binders are suitable for the development of wash-durable conductive pastes for wearable textile applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Emerging Technology Research, Taiwan Textile Research Institute, New Taipei City 236003, Taiwan.
- Institute of Organic and Polymeric Materials, National Taipei University of Technology, Taipei City 106344, Taiwan.
- Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei City 106335, Taiwan.
- Center for Continuing Education, National Tsing Hua University, Hsin Chu City 300044, Taiwan.
ORCID-Profile: Jem-Kun Chen, Wilson Hou-Sheng Huang
Förderung
- National Science and Technology Council
Zitieren
APA
Chou, S. C., Cheng, Y. Y., Chen, J. K., & Huang, W. H. (2026). Copolymer Engineering of Elastic–Rigid Elastomers for Wash-Durable Conductive Pastes in Wearable Textile Electronics. Polymers, 18(5), 609. https://doi.org/10.3390/polym18050609
Vancouver
Chou SC, Cheng YY, Chen JK, Huang WH. Copolymer Engineering of Elastic–Rigid Elastomers for Wash-Durable Conductive Pastes in Wearable Textile Electronics. Polymers. 2026;18(5):609. doi:10.3390/polym18050609
BibTeX
@article{Chou2026,
author = {Chou, Shang-Chih and Cheng, Yao-Yi and Chen, Jem-Kun and Huang, Wilson Hou-Sheng},
title = {Copolymer Engineering of Elastic–Rigid Elastomers for Wash-Durable Conductive Pastes in Wearable Textile Electronics},
journal = {Polymers},
year = {2026},
volume = {18},
number = {5},
pages = {609},
doi = {10.3390/polym18050609}
}
EUVIMED