EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Machine Learning-Enabled Optimization and Prediction of Mechanical Properties of 3D-Printed PLA Composites Filled with Rice Husk Biochar

Borhen Louhichi iD, Joy Djuansjah, P S Rama Sreekanth iD, Sundarasetty Harishbabu iD, P V Subhanjaneyulu iD, Santosh Kumar Sahu iD, It Ee Lee, Gwo Chin Chung iD

Polymers · 21.02.2026 · 18 (4) · 527

DOI: 10.3390/polym18040527 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 21.02.2026. Verfasst von Borhen Louhichi und 7 weiteren Autor:innen. Beteiligte Einrichtung: Engineering Sciences Research Center (ESRC), Deanship of Scientific Research, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh 11432, Saudi …. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This investigation focuses on rice husk biochar (RHBC) as a sustainable filler in a polylactic acid (PLA) matrix. This study employs optimization techniques, including central composite design (CCD) and analysis of variance (ANOVA), to systematically evaluate the effects of key 3D printing parameters such as filler content (0 wt.%, 10 wt.%, 20 wt.%), nozzle temperature (190 °C, 200 °C, 210 °C), orientation angle (0°, 60°, 120°), and fill pattern (hexagon, triangle, and 3D infill). Furthermore, machine learning models are used to predict the mechanical properties of PLA/RHBC composites from experimental data. The effects of these parameters on tensile strength, Young’s modulus, and hardness were analyzed. The ANOVA results showed that filler content was the most influential factor for tensile strength and Young’s modulus, contributing 36.47% and 73.25%, respectively, compared to pure PLA. For hardness, both filler content and nozzle temperature were key contributors, with a 44.08% improvement over pure PLA. Machine learning models, including multiple linear regression (MLR), K-Nearest Neighbors (KNN), Support Vector Machine (SVM), and Gradient Boosting, were used to predict the mechanical properties. Among these, Gradient Boosting achieved the best performance, with R2 values of 97.79% for tensile strength, 98.79% for Young’s modulus, and 96.8% for hardness. This study provides a robust framework that combines experimental analysis, statistical design, and machine learning to optimize RHBC as an eco-friendly filler for the development of PLA composites for adoption in the automotive, sports and aerospace industries.

Schlagwörter

Stichwörter der Autor:innen

3D printingANOVACCDmachine learningrice husk biochar (RHBC)

Autor:innen und Institutionen

  • Engineering Sciences Research Center (ESRC), Deanship of Scientific Research, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh 11432, Saudi Arabia.
  • College of Engineering, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh 11432, Saudi Arabia.
  • School of Mechanical Engineering, VIT-AP University, Besides A.P. Secretariat, Amaravati 522237, Andhra Pradesh, India.
  • Faculty of Artificial Intelligence and Engineering, Multimedia University, Cyberjaya 63100, Malaysia.
  • Centre for Smart Systems and Automation, COE for Robotics and Sensing Technologies, Multimedia University, Cyberjaya 63100, Malaysia.
  • Centre for Wireless Technology, COE for Intelligent Network, Multimedia University, Cyberjaya 63100, Malaysia.

ORCID-Profile: Borhen Louhichi, P S Rama Sreekanth, Sundarasetty Harishbabu, P V Subhanjaneyulu, Santosh Kumar Sahu, Gwo Chin Chung

Zitieren

APA

Louhichi, B., Djuansjah, J., Sreekanth, P. S. R., Harishbabu, S., Subhanjaneyulu, P. V., Sahu, S. K., Lee, I. E., & Chung, G. C. (2026). Machine Learning-Enabled Optimization and Prediction of Mechanical Properties of 3D-Printed PLA Composites Filled with Rice Husk Biochar. Polymers, 18(4), 527. https://doi.org/10.3390/polym18040527

Vancouver

Louhichi B, Djuansjah J, Sreekanth PSR, Harishbabu S, Subhanjaneyulu PV, Sahu SK, et al. Machine Learning-Enabled Optimization and Prediction of Mechanical Properties of 3D-Printed PLA Composites Filled with Rice Husk Biochar. Polymers. 2026;18(4):527. doi:10.3390/polym18040527

BibTeX
@article{Louhichi2026,
  author = {Louhichi, Borhen and Djuansjah, Joy and Sreekanth, P S Rama and Harishbabu, Sundarasetty and Subhanjaneyulu, P V and Sahu, Santosh Kumar and Lee, It Ee and Chung, Gwo Chin},
  title = {Machine Learning-Enabled Optimization and Prediction of Mechanical Properties of 3D-Printed PLA Composites Filled with Rice Husk Biochar},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {4},
  pages = {527},
  doi = {10.3390/polym18040527}
}
Kostenlos starten →