EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Assessing Melt Flow Rate in Post-Consumer Polypropylene via Near-Infrared Hyperspectral Imaging

Nikolai Kuhn iD, Moritz Mager iD, Gerald Koinig iD, Jutta Geier iD, Jean-Philippe Andreu, Joerg Fischer iD, Alexia Tischberger-Aldrian

Polymers · 20.02.2026 · 18 (4) · 524

DOI: 10.3390/polym18040524 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.02.2026. Verfasst von Nikolai Kuhn und 6 weiteren Autor:innen. Beteiligte Einrichtung: Chair of Waste Processing Technology and Waste Management, Department of Environmental and Energy Process Engineering, Technical University of Leoben…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Austrian Research Promotion Agency, Austrian Federal Ministry of Climate Action, Environment, Energy, Mobility, Innovation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mechanical recycling of polypropylene (PP) is constrained by the heterogeneous properties of post-consumer feedstocks. Melt flow rate (MFR) is a key property relevant to processing, and it varies widely across packaging grades, which limits the quality and substitutability of recyclates. This study evaluates near-infrared hyperspectral imaging (NIR-HSI) for predicting MFR in post-consumer PP packaging. Eighty-two rigid PP samples (46 white, 36 clear) with MFR values between 2 and 108 g 10 min−1 were collected from an Austrian material recovery facility. Thirteen different linear and non-linear regression models were examined using median and pixel-wise aggregated spectral representations across the samples. Tree-based models consistently achieved best performances with R2 = 0.85, RMSE = 12.4 g 10 min−1 on white samples and R2 = 0.61, RMSE = 14.0 g 10 min−1 on clear samples. On the combined sample set, R2 = 0.66 and RMSE = 17.3 g 10 min−1 were reached. Informative spectral regions correspond to typical bands of PP. Binary classification at different thresholds (6, 12, 30, 60 g 10 min−1) were also examined and achieved balanced accuracies of 0.82–0.92. Median spectral representations consistently outperformed pixel-wise aggregation. Results demonstrate that NIR-HSI can support grade-directed sorting of post-consumer PP, particularly for opaque white samples, though heteroscedasticity at high MFR values and irreducible outliers represent inherent limitations.

Schlagwörter

Stichwörter der Autor:innen

mechanical recyclingplastic recyclingsensor-based monitoring and controlsensor-based sorting

Autor:innen und Institutionen

  • Chair of Waste Processing Technology and Waste Management, Department of Environmental and Energy Process Engineering, Technical University of Leoben, 8700 Leoben, Austria.
  • Institute of Polymeric Materials and Testing, Johannes Kepler University Linz, 4040 Linz, Austria.
  • LIT Factory, Johannes Kepler University Linz, 4040 Linz, Austria.
  • Polymer Competence Center Leoben GmbH, 8700 Leoben, Austria.
  • Chair of Materials Science and Testing of Polymers, Department for Polymer Engineering and Science, Technical University of Leoben, 8700 Leoben, Austria.
  • Intelligent Vision Applications, Joanneum Research Forschungsgesellschaft mbH, 8010 Graz, Austria.

ORCID-Profile: Nikolai Kuhn, Moritz Mager, Gerald Koinig, Jutta Geier, Joerg Fischer

Förderung

  • Austrian Research Promotion Agency
  • Austrian Federal Ministry of Climate Action, Environment, Energy, Mobility, Innovation

Zitieren

APA

Kuhn, N., Mager, M., Koinig, G., Geier, J., Andreu, J. P., Fischer, J., & Tischberger-Aldrian, A. (2026). Assessing Melt Flow Rate in Post-Consumer Polypropylene via Near-Infrared Hyperspectral Imaging. Polymers, 18(4), 524. https://doi.org/10.3390/polym18040524

Vancouver

Kuhn N, Mager M, Koinig G, Geier J, Andreu JP, Fischer J, et al. Assessing Melt Flow Rate in Post-Consumer Polypropylene via Near-Infrared Hyperspectral Imaging. Polymers. 2026;18(4):524. doi:10.3390/polym18040524

BibTeX
@article{Kuhn2026,
  author = {Kuhn, Nikolai and Mager, Moritz and Koinig, Gerald and Geier, Jutta and Andreu, Jean-Philippe and Fischer, Joerg and Tischberger-Aldrian, Alexia},
  title = {Assessing Melt Flow Rate in Post-Consumer Polypropylene via Near-Infrared Hyperspectral Imaging},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {4},
  pages = {524},
  doi = {10.3390/polym18040524}
}
Kostenlos starten →