EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Machine Learning for Predicting Mechanical Properties of 3D-Printed Polymers from Process Parameters: A Review

Savvas Koltsakidis iD, Emmanouil K Tzimtzimis, Dimitrios Tzetzis iD

Polymers · 17.02.2026 · 18 (4) · 499

DOI: 10.3390/polym18040499 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 17.02.2026. Verfasst von Savvas Koltsakidis und 2 weiteren Autor:innen. Beteiligte Einrichtung: Digital Manufacturing and Materials Characterization Laboratory, School of Science and Technology, International Hellenic University, 57001 Thessalon…. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 84 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer additive manufacturing (AM) has grown rapidly in the past decade, with material extrusion, vat photopolymerization, powder bed fusion and jetting now widely used for functional polymer parts. The mechanical performance of these parts depends strongly on process parameters such as layer height, build orientation, energy input and post-processing conditions, which motivate the development of predictive models for process–property relationships. Classical approaches based on Taguchi designs, ANOVA and response surface methodology have provided valuable insight, but the potential of modern machine learning (ML) techniques is not yet fully exploited. This review surveys recent work on ML-based prediction of mechanical properties of polymer AM parts using process parameters as inputs. Across the literature, well-tuned artificial neural networks, tree-based ensembles and support vector regression typically achieve prediction errors below about 5–10% for strength and modulus, showing that data-driven surrogates can substantially reduce experimental trial-and-error in process optimization. Ongoing challenges include small datasets, missing standardized error metrics, and limited coverage of non-quasi-static phenomena like fatigue, impact, and environmental degradation.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingartificial neural networksmachine learningmechanical propertiesprocess parameters

Autor:innen und Institutionen

  • Digital Manufacturing and Materials Characterization Laboratory, School of Science and Technology, International Hellenic University, 57001 Thessaloniki, Greece.

ORCID-Profile: Savvas Koltsakidis, Dimitrios Tzetzis

Zitieren

APA

Koltsakidis, S., Tzimtzimis, E. K., & Tzetzis, D. (2026). Machine Learning for Predicting Mechanical Properties of 3D-Printed Polymers from Process Parameters: A Review. Polymers, 18(4), 499. https://doi.org/10.3390/polym18040499

Vancouver

Koltsakidis S, Tzimtzimis EK, Tzetzis D. Machine Learning for Predicting Mechanical Properties of 3D-Printed Polymers from Process Parameters: A Review. Polymers. 2026;18(4):499. doi:10.3390/polym18040499

BibTeX
@article{Koltsakidis2026,
  author = {Koltsakidis, Savvas and Tzimtzimis, Emmanouil K and Tzetzis, Dimitrios},
  title = {Machine Learning for Predicting Mechanical Properties of 3D-Printed Polymers from Process Parameters: A Review},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {4},
  pages = {499},
  doi = {10.3390/polym18040499}
}
Kostenlos starten →