EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pine Resin as a Natural Polymer Binder in Pine Cone-Reinforced Lightweight Concrete

Celal Kistak iD, Araz Muhammed Hassan, Ayse Bicer, Nevin Celik iD

Polymers · 29.01.2026 · 18 (3) · 364

DOI: 10.3390/polym18030364 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.01.2026. Verfasst von Celal Kistak und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Firat University, Elazig 23119, Turkey. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fırat University, Fırat University, Scientific Research Projects Supporting Unit.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of this study is to investigate the potential applications of pine cones as plant-based waste material in the construction industry. In order to achieve this target, the pine cone particles (PCP) are mixed with cement to create new lightweight concretes. Furthermore, pine tree resin (PTR), acting as a natural bio-polymer binder, is incorporated into selected samples to ascertain its potential as a binder. The pine cones are cut into particles of 2–4 cm, 0–2 cm, and ground into a powder. A series of critical tests is conducted on the novel produced samples, including thermal conductivity, specific heat, density, compressive strength, water absorption rate, and drying rate. The experiments show that thermal conductivity, specific heat capacity, and thermal expansion coefficient decrease as the weight ratio and size of PCP increase. The presence of PTR increases porosity, further decreasing thermal conductivity, specific heat, and thermal expansion coefficients for the majority of samples. The compressive strength values decrease with the presence of PTR and PCP. Regarding durability, the water absorption ratios remain below the critical 30% threshold, making the material suitable for internal applications or external facades protected by coating/plaster or as external coverings.

Schlagwörter

Stichwörter der Autor:innen

lightweight concretepine tree conepine tree resinthermal-mechanical properties

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Firat University, Elazig 23119, Turkey.
  • Department of Bioengineering, Turgut Ozal University, Malatya 44210, Turkey.

ORCID-Profile: Celal Kistak, Nevin Celik

Förderung

  • Fırat University
  • Fırat University, Scientific Research Projects Supporting Unit

Zitieren

APA

Kistak, C., Hassan, A. M., Bicer, A., & Celik, N. (2026). Pine Resin as a Natural Polymer Binder in Pine Cone-Reinforced Lightweight Concrete. Polymers, 18(3), 364. https://doi.org/10.3390/polym18030364

Vancouver

Kistak C, Hassan AM, Bicer A, Celik N. Pine Resin as a Natural Polymer Binder in Pine Cone-Reinforced Lightweight Concrete. Polymers. 2026;18(3):364. doi:10.3390/polym18030364

BibTeX
@article{Kistak2026,
  author = {Kistak, Celal and Hassan, Araz Muhammed and Bicer, Ayse and Celik, Nevin},
  title = {Pine Resin as a Natural Polymer Binder in Pine Cone-Reinforced Lightweight Concrete},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {3},
  pages = {364},
  doi = {10.3390/polym18030364}
}
Kostenlos starten →