Construction of a P/N/Zn Synergist for Enhancing the Fire Safety and Char Formation of PA6/Aluminum Diethylphosphinate Composites
Polymers · 28.01.2026 · 18 (3) · 351
DOI: 10.3390/polym18030351 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 28.01.2026. Verfasst von Qinghua Peng und 9 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hebei Natural Science Foundation, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Polyamide 6 is an important engineering thermoplastic; however, its practical use is often constrained by its high flammability. Although aluminum diethylphosphinate is widely employed as a flame retardant for polyamide 6, its relatively slow char-forming kinetics hinders the attainment of the stringent 750 °C glow-wire ignition temperature required for electrical applications at moderate loadings. To address this limitation, a synergist was fabricated via the self-assembly of phytic acid, benzoguanamine, and ZnSO4·7H2O and subsequently incorporated to enhance the char-forming capability and flame retardancy of polyamide 6/aluminum diethylphosphinate composites. The results revealed that the synergist acted as an efficient charring promoter, improving flame retardancy. At a total loading of 15 wt%, the composite reached a UL-94 V-0 rating and high limiting oxygen index of 30.7%. Cone calorimetry data indicate that the peak heat release rate decreased by 34.0%, and the smoke production rate decreased by 33.3% compared with the polyamide 6/aluminum diethylphosphinate composites. Mechanistic analysis indicated that the synergist catalyzed the carbonization of the polyamide 6, enabling the formation of a dense thermally insulating char barrier in the condensed phase. Notably, the optimized formulation achieved a glow-wire ignition temperature of 750 °C, demonstrating its strong potential for high-safety electrical applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, China.
- Beijing Key Laboratory of Advanced Functional Polymer Composites, Beijing University of Chemical Technology, Beijing 100029, China.
- School of Police Equipment and Technology, Chinese People's Police University, Langfang 065000, China.
ORCID-Profile: Jun Sun, Jianhua Li, Sheng Zhang
Förderung
- Hebei Natural Science Foundation
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Peng, Q., Hua, Y., Yang, J., Wang, Y., Guo, G., Li, W., Sun, J., Gu, X., Li, J., & Zhang, S. (2026). Construction of a P/N/Zn Synergist for Enhancing the Fire Safety and Char Formation of PA6/Aluminum Diethylphosphinate Composites. Polymers, 18(3), 351. https://doi.org/10.3390/polym18030351
Vancouver
Peng Q, Hua Y, Yang J, Wang Y, Guo G, Li W, et al. Construction of a P/N/Zn Synergist for Enhancing the Fire Safety and Char Formation of PA6/Aluminum Diethylphosphinate Composites. Polymers. 2026;18(3):351. doi:10.3390/polym18030351
BibTeX
@article{Peng2026,
author = {Peng, Qinghua and Hua, Yifang and Yang, Jingjing and Wang, Yujia and Guo, Gehao and Li, Wanen and Sun, Jun and Gu, Xiaoyu and Li, Jianhua and Zhang, Sheng},
title = {Construction of a P/N/Zn Synergist for Enhancing the Fire Safety and Char Formation of PA6/Aluminum Diethylphosphinate Composites},
journal = {Polymers},
year = {2026},
volume = {18},
number = {3},
pages = {351},
doi = {10.3390/polym18030351}
}
EUVIMED