EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and Numerical Assessment of Fiber Orientation Effects in Biaxial Glass/Vinyl Ester Laminates

Sultan Ullah iD, Arvydas Palevicius iD, Almontas Vilutis, Raul Fangueiro, Giedrius Janusas iD

Polymers · 19.01.2026 · 18 (2) · 265

DOI: 10.3390/polym18020265 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 19.01.2026. Verfasst von Sultan Ullah und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Faculty of Mechanical Engineering and Design, Kaunas University of Technology, Studentų 56, LT-51424 Kaunas, Li…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study analyzes the mechanical behavior of a quasi-isotropic biaxial glass fiber–vinyl ester composite in a multiaxial stress condition and the effect of the orientation of the fibers. A ply structure was created through the process of vacuum infusion using six layers of biaxial fabric that were oriented to 15°. Tensile samples were isolated at 0, 15, 30, 45 and 90 degrees relative to the warp direction. It was found that strength and stiffness strongly depend on orientation, with maximum tensile strengths of 157.2 MPa at 90° and 125 MPa at 0°, and minimum tensile strengths 59.6 MPa at 15°, showing fiber and shear failures, respectively. MAT_124 underwent finite element analysis in LS-DYNA, and the results were excellent, with a difference of less than 1.5%. Three-point bending and Charpy impact tests indicated that flexural properties were lower at 15° and 90°, whereas off-axis orientations were generally better at impact energy absorption, although at 45°, binding sites were few and far between. The results have important implications for the design of laminates subjected to complicated loads.

Schlagwörter

Stichwörter der Autor:innen

FEAVARTMbiaxial fabric compositemechanical propertiesstacking sequencethermoset

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Faculty of Mechanical Engineering and Design, Kaunas University of Technology, Studentų 56, LT-51424 Kaunas, Lithuania.
  • Department of Engineering, UAB Poliplastas, Geliu St. 97, LT-53330 Kaunas, Lithuania.
  • Fibrenamics, Institute of Innovation on Fibre-Based Materials and Composites, University of Minho, 4800-058 Guimarães, Portugal.

ORCID-Profile: Sultan Ullah, Arvydas Palevicius, Giedrius Janusas

Zitieren

APA

Ullah, S., Palevicius, A., Vilutis, A., Fangueiro, R., & Janusas, G. (2026). Experimental and Numerical Assessment of Fiber Orientation Effects in Biaxial Glass/Vinyl Ester Laminates. Polymers, 18(2), 265. https://doi.org/10.3390/polym18020265

Vancouver

Ullah S, Palevicius A, Vilutis A, Fangueiro R, Janusas G. Experimental and Numerical Assessment of Fiber Orientation Effects in Biaxial Glass/Vinyl Ester Laminates. Polymers. 2026;18(2):265. doi:10.3390/polym18020265

BibTeX
@article{Ullah2026,
  author = {Ullah, Sultan and Palevicius, Arvydas and Vilutis, Almontas and Fangueiro, Raul and Janusas, Giedrius},
  title = {Experimental and Numerical Assessment of Fiber Orientation Effects in Biaxial Glass/Vinyl Ester Laminates},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {2},
  pages = {265},
  doi = {10.3390/polym18020265}
}
Kostenlos starten →