Facile Fabrication of Attapulgite-Modified Chitosan Composite Aerogels with Enhanced Mechanical Strength and Flame Retardancy for Thermal Insulation
Polymers · 29.12.2025 · 18 (1) · 98
DOI: 10.3390/polym18010098 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 29.12.2025. Verfasst von Siyuan Cheng und 6 weiteren Autor:innen. Beteiligte Einrichtung: Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Huaian Industrial Research Institute, Gas Separation Engine…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Jiangsu Province Higher Education Institutions Basic Science (Natural Science) Research General Project, Jiangsu Province Higher Education Institutions Basic Science.
Abstract (Originalsprache)
Aerogels are recognized as exceptional thermal insulation materials, but poor mechanical strength and flammability problems hinder their application in high-temperature environments. Thermal management materials that combine high mechanical strength with superior flame retardancy are, therefore, critically important for thermal insulation. Herein, ultra-lightweight aerogels were facilely fabricated using chitosan (CS) and acidified attapulgite (SATP) as the primary components. The optimal composite, CS-SATP30%, exhibited a compressive strength of 633.15 kPa at 80% strain, demonstrating significant improvement in mechanical properties. Structural analysis revealed that the hydroxyl groups and amino groups of CS molecules formed hydrogen bonds with SATP, ensuring excellent interfacial affinity among the constituents. Compared to pure CS aerogel, the total heat release (THR) and peak heat release rate (PHRR) of CS-SATP30% were substantially reduced to 3.83 MJ/m2 and 37.00 kW/m2, respectively. Furthermore, the limiting oxygen index (LOI) of CS-SATP30% increased to 34% and passed the vertical burning test (UL-94). This study provides a feasible way to construct advanced chitosan-based thermal insulation aerogels.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Huaian Industrial Research Institute, Gas Separation Engineering Technology Research Center, College of Chemical Engineering, Nan…
- Synorm Chemical Co., Ltd., No. 16 Zijin Road, Circular Economy Zone, Huizhou District, Huangshan 245900, China.
ORCID-Profile: Bo Fu
Förderung
- National Natural Science Foundation of China
- Jiangsu Province Higher Education Institutions Basic Science (Natural Science) Research General Project
- Jiangsu Province Higher Education Institutions Basic Science
Zitieren
APA
Cheng, S., Shao, Y., Chen, M., Wang, C., Zhu, X., Zhang, X., & Fu, B. (2025). Facile Fabrication of Attapulgite-Modified Chitosan Composite Aerogels with Enhanced Mechanical Strength and Flame Retardancy for Thermal Insulation. Polymers, 18(1), 98. https://doi.org/10.3390/polym18010098
Vancouver
Cheng S, Shao Y, Chen M, Wang C, Zhu X, Zhang X, et al. Facile Fabrication of Attapulgite-Modified Chitosan Composite Aerogels with Enhanced Mechanical Strength and Flame Retardancy for Thermal Insulation. Polymers. 2025;18(1):98. doi:10.3390/polym18010098
BibTeX
@article{Cheng2025,
author = {Cheng, Siyuan and Shao, Yuwen and Chen, Meisi and Wang, Chenfei and Zhu, Xinbao and Zhang, Xiongfei and Fu, Bo},
title = {Facile Fabrication of Attapulgite-Modified Chitosan Composite Aerogels with Enhanced Mechanical Strength and Flame Retardancy for Thermal Insulation},
journal = {Polymers},
year = {2025},
volume = {18},
number = {1},
pages = {98},
doi = {10.3390/polym18010098}
}
EUVIMED