Investigating the Structural, Thermal, Electric, Dielectric, and EMI Shielding Properties of Porous Thermoplastic Polyurethane Reinforced with Carbon Fiber/Magnetite Fillers
Polymers · 21.12.2025 · 18 (1) · 19
DOI: 10.3390/polym18010019 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 21.12.2025. Verfasst von Hülya Kaftelen Odabaşı und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aircraft Maintenance and Repair, School of Civil Aviation, Fırat University, 23200 Elazığ, Turkey. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fırat University Scientific Project Units.
Abstract (Originalsprache)
In this study, Fe3O4-chopped carbon fiber (CF) fillers with varying CF:Fe3O4 weight ratios (1:0.5, 1:0.75, and 1:1) were fabricated using the wet chemical reduction method. Different weight percentages (1, 3, 7 wt.%) of the CF/Fe3O4 fillers were used to fabricate lightweight, flexible, and porous thermoplastic polyurethane (p-TPU) composites for electromagnetic interference (EMI) shielding applications. Due to its poor electrical and magnetic properties, the TPU matrix alone exhibited negligible shielding effectiveness. The electromagnetic interference (EMI) performance of TPU composites is greatly affected by the amount of filler materials, the CF/Fe3O4 ratio, and the porous structure, which in turn influence the interfacial interactions between filler and p-TPU matrix. Effective electromagnetic attenuation is achieved by conductive CF network, interfacial polarization at CF/Fe3O4/TPU interfaces, and multiple internal reflections promoted by microstructural heterogeneity and porosity. A maximum EMI shielding effectiveness (SET) of 22.28 dB was achieved for a CF/Fe3O4/p-TPU composite with a filler load of 7 wt.%, a CF:Fe3O4 ratio of 1:1, and a porosity of 15%.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Aircraft Maintenance and Repair, School of Civil Aviation, Fırat University, 23200 Elazığ, Turkey.
- Graduate School of Natural and Applied Science, Aerospace Science & Technologies, Fırat University, 23200 Elazığ, Turkey.
- Department of Metallurgical and Materials Engineering, Engineering Faculty, Fırat University, 23200 Elazığ, Turkey.
- Department of Electrical & Electronics Engineering, Engineering Faculty, Akdeniz University, 07058 Antalya, Turkey.
- Instituto Politécnico Nacional, Materiales y Tecnologías para Energía, Salud y Medio Ambiente (GESMAT), CICATA Altamira, Altamira 89600, Mexico.
ORCID-Profile: Hülya Kaftelen Odabaşı, Ümmühan Kaya, Akın Odabaşı, Selçuk Helhel, Fernando Ruiz-Perez, Felipe Caballero-Briones
Förderung
- Fırat University Scientific Project Units
Zitieren
APA
Kaftelen Odabaşı, H., Kaya, Ü., Odabaşı, A., Helhel, S., Ruiz-Perez, F., & Caballero-Briones, F. (2025). Investigating the Structural, Thermal, Electric, Dielectric, and EMI Shielding Properties of Porous Thermoplastic Polyurethane Reinforced with Carbon Fiber/Magnetite Fillers. Polymers, 18(1), 19. https://doi.org/10.3390/polym18010019
Vancouver
Kaftelen Odabaşı H, Kaya Ü, Odabaşı A, Helhel S, Ruiz-Perez F, Caballero-Briones F. Investigating the Structural, Thermal, Electric, Dielectric, and EMI Shielding Properties of Porous Thermoplastic Polyurethane Reinforced with Carbon Fiber/Magnetite Fillers. Polymers. 2025;18(1):19. doi:10.3390/polym18010019
BibTeX
@article{KaftelenOdaba2025,
author = {Kaftelen Odabaşı, Hülya and Kaya, Ümmühan and Odabaşı, Akın and Helhel, Selçuk and Ruiz-Perez, Fernando and Caballero-Briones, Felipe},
title = {Investigating the Structural, Thermal, Electric, Dielectric, and EMI Shielding Properties of Porous Thermoplastic Polyurethane Reinforced with Carbon Fiber/Magnetite Fillers},
journal = {Polymers},
year = {2025},
volume = {18},
number = {1},
pages = {19},
doi = {10.3390/polym18010019}
}
EUVIMED