Intelligent Modeling of Erosion-Corrosion in Polymer Composites: Integrating Fuzzy Logic and Machine Learning
Polymers · 19.12.2025 · 18 (1) · 9
DOI: 10.3390/polym18010009 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 19.12.2025. Verfasst von Hazzaa F Alqurashi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, College of Engineering and Architecture, Umm Al-Qura University, P.O. Box 5555, Makkah 21955, Saudi Arabia. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Umm al-Qura University.
Abstract (Originalsprache)
This study presents a novel hybrid intelligent framework integrating fuzzy logic and artificial neural networks (ANN) to model the erosion-corrosion behavior of glass-fiber-reinforced pipes (GRP) under harsh operating conditions. Experimental data encompassing multiple operational parameters—including abrasive sand concentrations (250 g, 400 g, 500 g), flow rates (0.0067 m3/min, 0.01 m3/min, 0.015 m3/min), chlorine content (0–10 wt.%), and exposure times (1–5 h)—were utilized to develop the computational models. The fuzzy logic system effectively captured qualitative expert knowledge and uncertainty in material degradation processes, while ANN models provided quantitative predictions of erosion and corrosion rates. Results demonstrated good prediction accuracy, with R2 values of 0.81 for corrosion rate and moderate prediction accuracy 0.56 for erosion rate. The analysis revealed that flow rate (correlation: 0.6) and fuzzy severity (0.6) were the most influential parameters, followed by chlorine content (0.41) and sand concentration (0.32). The hybrid model identified optimal operating conditions to minimize material degradation: low sand concentration (250 g), low flow rate (0.0067 m3/min), absence of chlorine, and shorter exposure times. This intelligent modeling approach provides a powerful tool for predictive maintenance, operational optimization, and service life prediction of GRP systems in aggressive environments, bridging the gap between experimental data and computational intelligence for enhanced material performance assessment.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mechanical Engineering Department, College of Engineering and Architecture, Umm Al-Qura University, P.O. Box 5555, Makkah 21955, Saudi Arabia.
- Mechanical Engineering Department, Faculty of Engineering, Qena University, Qena 83523, Egypt.
- Mechanical Engineering Department, College of Engineering, Alasala Colleges, King Fahd Bin Abdulaziz Rd., Dammam 31483, Saudi Arabia.
- Department of Chemistry, Faculty of Science, Umm Al-Qura University, Makkah 24230, Saudi Arabia.
- Industrial Engineering Department, College of Engineering and Computer Science, Mustaqbal University, Western Ring Road, Al Hamra Exit, Buraydah 52547, Saudi Arabia.
- Technical Section, Training Management Department, The Energy and Water Academy, P.O. Box 53, Rabigh 21911, Saudi Arabia.
ORCID-Profile: Hazzaa F Alqurashi, Mohammed Y Abdellah, Mubark Alshareef, Mohamed K Hassan, Ahmed F Moamed
Förderung
- Umm al-Qura University
Zitieren
APA
Alqurashi, H. F., Abdellah, M. Y., Alshareef, M., Hassan, M. K., Alabdullah, F. T., & Moamed, A. F. (2025). Intelligent Modeling of Erosion-Corrosion in Polymer Composites: Integrating Fuzzy Logic and Machine Learning. Polymers, 18(1), 9. https://doi.org/10.3390/polym18010009
Vancouver
Alqurashi HF, Abdellah MY, Alshareef M, Hassan MK, Alabdullah FT, Moamed AF. Intelligent Modeling of Erosion-Corrosion in Polymer Composites: Integrating Fuzzy Logic and Machine Learning. Polymers. 2025;18(1):9. doi:10.3390/polym18010009
BibTeX
@article{Alqurashi2025,
author = {Alqurashi, Hazzaa F and Abdellah, Mohammed Y and Alshareef, Mubark and Hassan, Mohamed K and Alabdullah, Fadhel T and Moamed, Ahmed F},
title = {Intelligent Modeling of Erosion-Corrosion in Polymer Composites: Integrating Fuzzy Logic and Machine Learning},
journal = {Polymers},
year = {2025},
volume = {18},
number = {1},
pages = {9},
doi = {10.3390/polym18010009}
}
EUVIMED