EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing the Mechanical and Rheological Properties of Coal-Based Geopolymer Grouting Materials with Nano-SiO2 and Polypropylene Fibers

Sai Liu, Lei Zhang, Ning Hou, Wenxuan Meng

Polymers · 18.12.2025 · 17 (24) · 3338

DOI: 10.3390/polym17243338 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 18.12.2025. Verfasst von Sai Liu und 3 weiteren Autor:innen. Beteiligte Einrichtung: National Energy Group Guoyuan Electric Power Co., Ltd., Beijing 100011, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to address the ineffective utilization of industrial solid wastes—particularly fly ash—under the “coal-power integration” model, and to improve the performance of coal-based solid waste geopolymer grouting materials (CBGWG) under dynamic water conditions, this study selected fly ash and coal gangue as the main raw materials to jointly prepare dynamic water grouting slurry. The effects of nano-SiO2 and polypropylene fibers (PPF) on gelation time, initial setting time, bleeding rate, apparent viscosity, compressive strength, and flexural strength were systematically investigated. The experimental results indicate that when the nano-SiO2 content was increased to 1%, the water separation rate decreased by 85.8%, viscosity increased by 17.5%, and both gelation time and initial setting time were reduced by 51.5% and 18.6%, respectively. At a nano-SiO2 content of 0.75% and a PPF dosage of 1.5%, the compressive strength and flexural strength increased by 43.3% and 53%, respectively. However, when the PPF dosage was further increased to 2%, fiber agglomeration occurred during mixing, impairing uniform dispersion. Nano-SiO2 predominantly enhanced the early stiffness of the consolidated body, while PPF significantly improved ductility, residual load-bearing capacity, and energy dissipation, albeit at the expense of some stiffness. These two modifiers exhibited complementary effects in improving the mechanical properties of the grouting material. The optimal dosages of nano-SiO2 and PPF were determined to be 0.75% and 1.5%, respectively, achieving the best balance between mechanical properties and workability.

Schlagwörter

Stichwörter der Autor:innen

coal-based solid wastegeopolymergrouting materialnano-SiO2polypropylene fiber

Autor:innen und Institutionen

  • National Energy Group Guoyuan Electric Power Co., Ltd., Beijing 100011, China.
  • Shenhua Geol Explorat Co., Ltd., Beijing 100089, China.
  • School of Engineering and Technology, China University of Geosciences Beijing, Beijing 100083, China.

Förderung

  • the National Natural Science Foundation of China
  • National Natural Science Foundation of China

Zitieren

APA

Liu, S., Zhang, L., Hou, N., & Meng, W. (2025). Enhancing the Mechanical and Rheological Properties of Coal-Based Geopolymer Grouting Materials with Nano-SiO2 and Polypropylene Fibers. Polymers, 17(24), 3338. https://doi.org/10.3390/polym17243338

Vancouver

Liu S, Zhang L, Hou N, Meng W. Enhancing the Mechanical and Rheological Properties of Coal-Based Geopolymer Grouting Materials with Nano-SiO2 and Polypropylene Fibers. Polymers. 2025;17(24):3338. doi:10.3390/polym17243338

BibTeX
@article{Liu2025,
  author = {Liu, Sai and Zhang, Lei and Hou, Ning and Meng, Wenxuan},
  title = {Enhancing the Mechanical and Rheological Properties of Coal-Based Geopolymer Grouting Materials with Nano-SiO2 and Polypropylene Fibers},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {24},
  pages = {3338},
  doi = {10.3390/polym17243338}
}
Kostenlos starten →