Comparative Analysis and Predictive Modeling of Wear Performance of Glass- and Bamboo Fiber-Reinforced Nanoclay–Epoxy Composites Using RSM and ANN
Polymers · 11.12.2025 · 17 (24) · 3286
DOI: 10.3390/polym17243286 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 11.12.2025. Verfasst von Syed Mansoor Ahmad und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Industrial Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal 576104, Karnataka,…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This research contributes to the field of materials engineering through an analysis of the wear performance of both glass fiber-reinforced epoxy composites (GFEC) and bamboo fiber-reinforced epoxy composites (BFEC). This study aims to assess the wear performance, defined by mass loss, of the composites under various factors: load, speed, time, nanoclay content, and composite type. Specimens are subjected to wear tests by a pin-on-disc tribometer. Composite wear performance is studied through Response Surface Methodology (RSM) and Artificial Neural Networks (ANN) as predictive models. Experimental runs are planned based on the Box–Behnken design of RSM to present a regression model that is then checked with an ANOVA analysis; afterwards, training and testing are performed using an ANN model to improve predictive accuracy. As per the results, GFEC exhibits lower mass loss compared to BFEC. For both of the composites, the mass loss is drastically reduced by the addition of nanoclay. The addition of nanoclay has more pronounced effects on BFECs than on GFECs. ANN predictions are found to be better in agreement with the experimental values compared to those derived from the RSM model. Scanning Electron Microscopy (SEM) analysis provides insight into wear mechanisms. This study demonstrates the effectiveness of a statistical and machine learning approach in optimizing wear performance in composite materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical and Industrial Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal 576104, Karnataka, India.
- Department of Mathematics, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal 576104, Karnataka, India.
ORCID-Profile: Syed Mansoor Ahmad, Manjunath Shettar, Ashwini Bhat
Zitieren
APA
Ahmad, S. M., Channegowda, G. M., Shettar, M., & Bhat, A. (2025). Comparative Analysis and Predictive Modeling of Wear Performance of Glass- and Bamboo Fiber-Reinforced Nanoclay–Epoxy Composites Using RSM and ANN. Polymers, 17(24), 3286. https://doi.org/10.3390/polym17243286
Vancouver
Ahmad SM, Channegowda GM, Shettar M, Bhat A. Comparative Analysis and Predictive Modeling of Wear Performance of Glass- and Bamboo Fiber-Reinforced Nanoclay–Epoxy Composites Using RSM and ANN. Polymers. 2025;17(24):3286. doi:10.3390/polym17243286
BibTeX
@article{Ahmad2025,
author = {Ahmad, Syed Mansoor and Channegowda, Gowrishankar Mandya and Shettar, Manjunath and Bhat, Ashwini},
title = {Comparative Analysis and Predictive Modeling of Wear Performance of Glass- and Bamboo Fiber-Reinforced Nanoclay–Epoxy Composites Using RSM and ANN},
journal = {Polymers},
year = {2025},
volume = {17},
number = {24},
pages = {3286},
doi = {10.3390/polym17243286}
}
EUVIMED