EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of Mono-Material Multilayer Light Barrier Films

Rocío Ayelén Fuentes iD, Giacomo Foli iD, Roberta Di Carlo iD, Yanela Natalyn Alonso, Luciana Andrea Castillo iD, Matteo Minelli iD

Polymers · 10.12.2025 · 17 (24) · 3279

DOI: 10.3390/polym17243279 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 10.12.2025. Verfasst von Rocío Ayelén Fuentes und 5 weiteren Autor:innen. Beteiligte Einrichtung: Planta Piloto de Ingeniería Química, PLAPIQUI (UNS-CONICET), Bahía Blanca 8000, Argentina. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Proyecto bilateral Ministero Degli Affari Esteri - MAECI (Italia) - SGCTeIP (Argentina), National Recovery and Resilience Plan - ECCSELLENT, National Recovery and Resilience Plan, Project ECOSISTER.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mono-material multilayer polypropylene films were developed as light barrier structures through the incorporation of mineral-filled composite layers. Trilayer films with different layer arrangements were fabricated by thermocompression from polypropylene-based films containing 0, 1 and 5 wt.% of talc and kaolinite. A monolayer polypropylene film of equivalent total thickness was used as a control. Structural, thermal, mechanical, optical, and gas barrier properties were evaluated for all films fabricated. A well-defined trilayer structure was confirmed by SEM. FTIR analysis demonstrated negligible thermo-oxidation, with no thermal-degradation during processing. Improved thermal stability and a slight modification in crystallinity were evidenced by TGA and DSC, respectively. XRD revealed the predominance of the α-form crystalline phase and a preferential polymer crystal orientation associated with the particle presence. Regarding mechanical behavior, enhanced stiffness and tensile strength without loss of sealability or puncture resistance were observed. Trilayer films exhibited significantly reduced UV and visible light transmittance, while maintaining adequate translucency, making them suitable for photosensitive packaging applications. Gas permeabilities remained nearly unchanged, confirming that the barrier performances were preserved. Overall, these mono-material multilayer composites films offer a promising and recyclable alternative to conventional multi-material light barrier packaging, combining improved UV protection, mechanical robustness, and environmental compatibility.

Schlagwörter

Stichwörter der Autor:innen

compositekaolinitelight barrier propertiesmineral particlesmono-materialmultilayer filmspolypropylenetalc

Autor:innen und Institutionen

  • Planta Piloto de Ingeniería Química, PLAPIQUI (UNS-CONICET), Bahía Blanca 8000, Argentina.
  • Departamento de Ingeniería Química, Universidad Nacional del Sur, Bahía Blanca 8000, Argentina.
  • Department of Civil, Chemical, Environmental and Materials Engineering (DICAM)-Alma Mater Studiorum, University of Bologna, 40131 Bologna, Italy.

ORCID-Profile: Rocío Ayelén Fuentes, Giacomo Foli, Roberta Di Carlo, Luciana Andrea Castillo, Matteo Minelli

Förderung

  • Proyecto bilateral Ministero Degli Affari Esteri - MAECI (Italia) - SGCTeIP (Argentina)
  • National Recovery and Resilience Plan - ECCSELLENT
  • National Recovery and Resilience Plan, Project ECOSISTER
  • “Development of E. coli biosensors for Smart Packaging of meat products” Proyecto bilateral Ministero Degli Affari Esteri—MAECI (Italia)—SGCTeIP
  • National Recovery and Resilience Plan
  • European Union—NextGenerationEU—PNRR
  • Italian National Recovery and Resilience Plan

Zitieren

APA

Fuentes, R. A., Foli, G., Di Carlo, R., Alonso, Y. N., Castillo, L. A., & Minelli, M. (2025). Development of Mono-Material Multilayer Light Barrier Films. Polymers, 17(24), 3279. https://doi.org/10.3390/polym17243279

Vancouver

Fuentes RA, Foli G, Di Carlo R, Alonso YN, Castillo LA, Minelli M. Development of Mono-Material Multilayer Light Barrier Films. Polymers. 2025;17(24):3279. doi:10.3390/polym17243279

BibTeX
@article{Fuentes2025,
  author = {Fuentes, Rocío Ayelén and Foli, Giacomo and Di Carlo, Roberta and Alonso, Yanela Natalyn and Castillo, Luciana Andrea and Minelli, Matteo},
  title = {Development of Mono-Material Multilayer Light Barrier Films},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {24},
  pages = {3279},
  doi = {10.3390/polym17243279}
}
Kostenlos starten →