EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CFD-Based Evaluation of Stirred Tank Designs for High-Viscosity Copolymer Aramid Dope Mixing

Dong-Hyun Yeo, Hyun-Sung Yoon, Seong-Hun Yu iD, Jee-Hyun Sim

Polymers · 04.12.2025 · 17 (23) · 3233

DOI: 10.3390/polym17233233 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 04.12.2025. Verfasst von Dong-Hyun Yeo und 3 weiteren Autor:innen. Beteiligte Einrichtung: Korea Dyeing & Finishing Technology Institute (DYETEC Institute), Daegu 41706, Republic of Korea. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-viscosity aramid copolymer solutions are widely used in fiber manufacturing and advanced composite applications, but their elevated viscosity poses significant challenges for mixing and agitation processes. This study employs computational fluid dynamics (CFD) simulations to enhance the mixing performance of such systems. Flow behavior around the impeller was analyzed within a cylindrical stirred tank while varying the number of baffles (0, 2, 4, and 6) and comparing two different impeller designs (A and B). Simulation results showed that installing a sufficient number of baffles—particularly four—effectively suppressed swirling flows commonly observed in high-viscosity fluids, thereby significantly improving mixing efficiency. Additionally, impeller geometry played a critical role in performance: the axial-flow impeller promoted faster homogenization and broader circulation compared with the radial-flow design. Through this CFD-based analysis, this study elucidates the key mechanisms governing mixing in high-viscosity fluids and provides practical design and operational guidelines for industrial stirred tank systems. These findings complement existing empirical guidelines focused on low-viscosity fluids and contribute to improving the efficiency and reliability of high-viscosity polymer processing.

Schlagwörter

Stichwörter der Autor:innen

baffle effectcomputational fluid dynamics (CFD)copolymer aramid dopemixing performancestirred tank design

Autor:innen und Institutionen

  • Korea Dyeing & Finishing Technology Institute (DYETEC Institute), Daegu 41706, Republic of Korea.

ORCID-Profile: Seong-Hun Yu

Förderung

  • Ministry of Trade, Industry and Energy

Zitieren

APA

Yeo, D. H., Yoon, H. S., Yu, S. H., & Sim, J. H. (2025). CFD-Based Evaluation of Stirred Tank Designs for High-Viscosity Copolymer Aramid Dope Mixing. Polymers, 17(23), 3233. https://doi.org/10.3390/polym17233233

Vancouver

Yeo DH, Yoon HS, Yu SH, Sim JH. CFD-Based Evaluation of Stirred Tank Designs for High-Viscosity Copolymer Aramid Dope Mixing. Polymers. 2025;17(23):3233. doi:10.3390/polym17233233

BibTeX
@article{Yeo2025,
  author = {Yeo, Dong-Hyun and Yoon, Hyun-Sung and Yu, Seong-Hun and Sim, Jee-Hyun},
  title = {CFD-Based Evaluation of Stirred Tank Designs for High-Viscosity Copolymer Aramid Dope Mixing},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {23},
  pages = {3233},
  doi = {10.3390/polym17233233}
}
Kostenlos starten →