Resin-Reinforced Auxetic Structures with Re-Entrant Struts for Improved Energy Absorption
Polymers · 29.11.2025 · 17 (23) · 3176
DOI: 10.3390/polym17233176 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 29.11.2025. Verfasst von César Garrido und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Universidad del Bío-Bío, Concepción 4081112, Chile. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study aims to improve the energy absorption and mechanical properties of auxetic structures by optimizing their design and analyzing the influence of different resin matrices in composite fabrication. Auxetic materials exhibit unique deformation behavior due to their negative Poisson’s ratio, making them promising for energy absorption applications. However, their practical implementation is often constrained by their intrinsic mechanical properties, particularly their strength under realistic loading conditions. This research investigates the effect of resin matrix selection on the energy absorption capacity, Young’s modulus, and yield strength of auxetic composites. A systematic experimental campaign was conducted, subjecting auxetic structures reinforced with various resin matrices to compressive loading. The results indicate that embedding the auxetic structure within a resin matrix significantly enhances energy absorption compared to pure resin samples. Notably, vinylester resin composites exhibited the highest Young’s modulus, yield strength, and energy absorption capacity. This superior performance is attributed to the synergistic interaction between the auxetic structure, which efficiently distributes stress, as well as the intrinsic toughness and load-bearing capacity of the vinylester resin. These findings contribute to the optimization of auxetic composites for energy absorption applications and the development of high-performance materials for impact mitigation in aerospace and automotive industries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Universidad del Bío-Bío, Concepción 4081112, Chile.
- Department of Mechanical Engineering, Universidad de La Frontera, Temuco 4811230, Chile.
- Department of Industrial Technologies, Faculty of Engineering, University of Talca, Camino a Los Niches Km 1, Curicó 3344158, Chile.
- Master Program in Engineering Sciences, Faculty of Engineering, Universidad de La Frontera, Temuco 4811230, Chile.
- Construction Multidisciplinary Research Group, Facultad de Arquitectura, Construcción y Medio Ambiente, Universidad Autónoma de Chile, Talca 3460000, Chile.
ORCID-Profile: César Garrido, Jorge Fernández, Víctor Tuninetti, Gonzalo Pincheira, Ignacio Ríos, Rodrigo Valle
Zitieren
APA
Garrido, C., Fernández, J., Tuninetti, V., Pincheira, G., Ríos, I., & Valle, R. (2025). Resin-Reinforced Auxetic Structures with Re-Entrant Struts for Improved Energy Absorption. Polymers, 17(23), 3176. https://doi.org/10.3390/polym17233176
Vancouver
Garrido C, Fernández J, Tuninetti V, Pincheira G, Ríos I, Valle R. Resin-Reinforced Auxetic Structures with Re-Entrant Struts for Improved Energy Absorption. Polymers. 2025;17(23):3176. doi:10.3390/polym17233176
BibTeX
@article{Garrido2025,
author = {Garrido, César and Fernández, Jorge and Tuninetti, Víctor and Pincheira, Gonzalo and Ríos, Ignacio and Valle, Rodrigo},
title = {Resin-Reinforced Auxetic Structures with Re-Entrant Struts for Improved Energy Absorption},
journal = {Polymers},
year = {2025},
volume = {17},
number = {23},
pages = {3176},
doi = {10.3390/polym17233176}
}
EUVIMED