Study on the Tensile Properties and Waterproofing Mechanism of Bamboo Fibers Treated by Different Methods
Polymers · 26.11.2025 · 17 (23) · 3146
DOI: 10.3390/polym17233146 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 26.11.2025. Verfasst von Chuncheng Sun und 3 weiteren Autor:innen. Beteiligte Einrichtung: Hebei Key Laboratory of Green Construction and Intelligent Maintenance for Civil Engineering, Hebei Province Engineering Research Center for Harmless…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Central Guiding Local Science and Technology Development Fund Projects, Haiying Cao.
Abstract (Originalsprache)
Bamboo fibers have received significant attention due to their biodegradability and environmental benefits. However, their inherent hydrophilicity causes dramatic degradation in mechanical properties after water absorption. Some methods have been adopted to treat bamboo fiber to address this challenge, e.g., sodium hydroxide (NaOH) solution treatment, vegetable oil treatment, and carboxylated styrene butadiene rubber (XSBR) treatment. In this study, the sodium silicate solution treatment method is proposed. The effects of four treatment methods on bamboo fibers are systematically evaluated using direct tensile tests, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). The results indicate that all four treatment methods can effectively mitigate the reduction in tensile stress and Young’s modulus of bamboo fibers after water immersion. Sodium silicate solution (modulus = 3.3)-treated bamboo fibers show the smallest reduction in tensile strength (36.8%), while the Young’s modulus of the sodium silicate solution (modulus = 2.3)-treated fibers increased by 4.5%. FTIR analysis shows that four treatment methods lead to reduction in hydrophilic groups in bamboo fiber. For the sodium silicate solution treatment method, a hydrophobic solidified sodium silicate layer forms on the surface of bamboo fibers, which further hinders moisture absorption.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Hebei Key Laboratory of Green Construction and Intelligent Maintenance for Civil Engineering, Hebei Province Engineering Research Center for Harmless Synergistic Treatment and Recycling of Municipal Solid Waste, School…
Förderung
- Central Guiding Local Science and Technology Development Fund Projects
- Haiying Cao
Zitieren
APA
Sun, C., Cao, H., Zhang, E., & Liu, J. (2025). Study on the Tensile Properties and Waterproofing Mechanism of Bamboo Fibers Treated by Different Methods. Polymers, 17(23), 3146. https://doi.org/10.3390/polym17233146
Vancouver
Sun C, Cao H, Zhang E, Liu J. Study on the Tensile Properties and Waterproofing Mechanism of Bamboo Fibers Treated by Different Methods. Polymers. 2025;17(23):3146. doi:10.3390/polym17233146
BibTeX
@article{Sun2025,
author = {Sun, Chuncheng and Cao, Haiying and Zhang, Enhua and Liu, Jiefeng},
title = {Study on the Tensile Properties and Waterproofing Mechanism of Bamboo Fibers Treated by Different Methods},
journal = {Polymers},
year = {2025},
volume = {17},
number = {23},
pages = {3146},
doi = {10.3390/polym17233146}
}
EUVIMED