EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of the Effect of Fabrication Parameters on the Properties of Biopolymer Coatings Deposited on Ti13Zr13Nb Alloy

Michał Bartmański iD, Kamila Sionek

Polymers · 25.11.2025 · 17 (23) · 3136

DOI: 10.3390/polym17233136 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 25.11.2025. Verfasst von Michał Bartmański und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomaterials Technology, Faculty of Mechanical Engineering and Ship Technology, Gdańsk University of Technology, 82-233 Gdańsk, Poland. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Polish National Science Centre, Gdańsk University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work describes the preparation and characterization of chitosan-based biopolymer coatings containing silver, zinc, and hydroxyapatite nanoparticles deposited on the Ti13Zr13Nb alloy by the EPD method. It was intended to evaluate the influence of surface pretreatments and deposition parameters on the structural, electrochemical, and biological properties of coatings. The morphology and composition were characterized by means of SEM/EDS, AFM, XRD, and FTIR analysis. The obtained results indicated uniform continuous layers with homogeneously distributed nanoparticles and the presence of characteristic functional groups originating from chitosan and hydroxyapatite. Corrosion investigations performed in SBF solution revealed a significant enhancement in corrosion resistance for chitosan/nanoAg/nanoZn/nanoHAp coatings, reflected in a drastic decrease in corrosion current density compared with uncoated Ti13Zr13Nb alloy. The contact angle measurements confirmed their hydrophilic nature, which favors better biointegration ability. Biological tests (MTT and LDH) performed on human osteoblasts (hFOB 1.19) confirmed high biocompatibility (>85% cell viability) in the case of all coatings with the addition of hydroxyapatite, whereas in the case of coatings without HAp, cytotoxicity was observed, probably due to the uncontrolled release of metallic nanoparticles. These findings suggest that the presence of hydroxyapatite in chitosan-based coatings efficiently enhances corrosion protection and cytocompatibility, showing very good prospects for biomedical applications such as the surface modification of titanium implants.

Schlagwörter

Stichwörter der Autor:innen

Ti13Zr13Nb alloybiocompatibilitychitosan-based coatingscorrosion resistanceelectrophoretic deposition (EPD)nanoparticles

Autor:innen und Institutionen

  • Department of Biomaterials Technology, Faculty of Mechanical Engineering and Ship Technology, Gdańsk University of Technology, 82-233 Gdańsk, Poland.

ORCID-Profile: Michał Bartmański

Förderung

  • Polish National Science Centre
  • Gdańsk University of Technology

Zitieren

APA

Bartmański, M., & Sionek, K. (2025). Analysis of the Effect of Fabrication Parameters on the Properties of Biopolymer Coatings Deposited on Ti13Zr13Nb Alloy. Polymers, 17(23), 3136. https://doi.org/10.3390/polym17233136

Vancouver

Bartmański M, Sionek K. Analysis of the Effect of Fabrication Parameters on the Properties of Biopolymer Coatings Deposited on Ti13Zr13Nb Alloy. Polymers. 2025;17(23):3136. doi:10.3390/polym17233136

BibTeX
@article{Bartmaski2025,
  author = {Bartmański, Michał and Sionek, Kamila},
  title = {Analysis of the Effect of Fabrication Parameters on the Properties of Biopolymer Coatings Deposited on Ti13Zr13Nb Alloy},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {23},
  pages = {3136},
  doi = {10.3390/polym17233136}
}
Kostenlos starten →