EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Drop Hammer Impact Ignition Experiment and Effect of Additives on Energy Release Characteristics of PTFE-Based Reactive Materials

Junming Yuan, Jiaying Gu, Zhe Zhai, Jinying Wang, Peijiang Han, Jiangqi Linghu, Yang Liu

Polymers · 14.11.2025 · 17 (22) · 3029

DOI: 10.3390/polym17223029 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 14.11.2025. Verfasst von Junming Yuan und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Environment and Safety Engineering, North University of China, Taiyuan 030051, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technical field fund projects of China, Robust Munitions Center, CAEP.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To solve the problem of low energy release efficiency of fluoropolymer-based reactive materials, four PTFE (Polytetrafluoroethylene) -based reactive structural materials with different contents were prepared by adding traditional energetic materials (RDX, 1,3,5-Trinitrohexahydro-1,3,5-triazine) and alloy metals (aluminum magnesium, aluminum magnesium zinc). In addition, in order to reduce the high cost of the existing high-speed impact energy release testing device, the formulation optimization of PTFE-based aluminum alloy reactive material was efficiently carried out using a small-scale drop hammer impact test in this paper. The self-designed impact energy release testing device was established for the overpressure measurement of PTFE-based aluminum alloy reactive materials. The impact response processes of PTFE-based aluminum alloy reactive material were recorded with high-speed photography. The energy release characteristics were quantified using overpressure measurements. Based on the chemical reaction properties and microstructural characterization of the PTFE-based reactive materials, the ignition mechanism of aluminum alloy reactive materials was analyzed under drop hammer impact load. The results show that the quantitative characterization of the overpressure changes of reactive materials in a quasi-enclosed space before and after reaction can reflect their energy release efficiency under low-velocity impact by using the drop hammer impact energy release testing device. The order of impact response overpressure values for four PTFE-based reactive materials has been conducted. The aluminum alloy reactive material containing RDX explosive has the highest overpressure value and the highest energy release efficiency in terms of drop hammer impact response. Based on the ignition mechanism and energy release characteristics of these four PTFE-based reactive materials, it was found that the addition of alloy metal powder can reduce impact sensitivity, but when activated, it can effectively enhance the damage effect.

Schlagwörter

Stichwörter der Autor:innen

PTFE-based reactive materialsaluminum alloydrop hammer impactenergy release efficiencyexplosiveignition mechanism

Autor:innen und Institutionen

  • School of Environment and Safety Engineering, North University of China, Taiyuan 030051, China.
  • China Research and Development Academy of Machinery Equipment, Beijing 100089, China.

Förderung

  • Technical field fund projects of China
  • Robust Munitions Center, CAEP

Zitieren

APA

Yuan, J., Gu, J., Zhai, Z., Wang, J., Han, P., Linghu, J., & Liu, Y. (2025). Drop Hammer Impact Ignition Experiment and Effect of Additives on Energy Release Characteristics of PTFE-Based Reactive Materials. Polymers, 17(22), 3029. https://doi.org/10.3390/polym17223029

Vancouver

Yuan J, Gu J, Zhai Z, Wang J, Han P, Linghu J, et al. Drop Hammer Impact Ignition Experiment and Effect of Additives on Energy Release Characteristics of PTFE-Based Reactive Materials. Polymers. 2025;17(22):3029. doi:10.3390/polym17223029

BibTeX
@article{Yuan2025,
  author = {Yuan, Junming and Gu, Jiaying and Zhai, Zhe and Wang, Jinying and Han, Peijiang and Linghu, Jiangqi and Liu, Yang},
  title = {Drop Hammer Impact Ignition Experiment and Effect of Additives on Energy Release Characteristics of PTFE-Based Reactive Materials},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {22},
  pages = {3029},
  doi = {10.3390/polym17223029}
}
Kostenlos starten →