EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biorenewable FDCA-Based Alkyd Resins for More Sustainable Wood Coatings

Victor Klushin iD, Ivan Zubkov iD, Dmitry Petrenko iD, Alina Petrenko, Tatyana Yurieva, Tatyana Belichenko, Aleksey Yatsenko, Yash Kataria, Anna Ulyankina iD

Polymers · 14.11.2025 · 17 (22) · 3022

DOI: 10.3390/polym17223022 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 14.11.2025. Verfasst von Victor Klushin und 8 weiteren Autor:innen. Beteiligte Einrichtung: Research Institute "Nanotechnologies and New Materials", Platov South-Russian State Polytechnic University, 346428 Novocherkassk, Russia. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Alkyd resins (ARs) represent a significant development in synthetic polymers, being among the oldest ones and playing a crucial role in numerous applications, especially within the coating sector. The trend is moving towards replacing non-renewable resources in the production of ARs with bio-based alternatives, with the goal of creating more sustainable binder materials as part of the transition to a bioeconomy. 2,5-Furandicarboxylic acid (FDCA) serves as a promising biomass-derived “building block” to replace non-renewable petroleum-derived aromatic diacids and anhydrides in AR synthesis. Various vegetable oils, including sunflower seed (SFO) and linseed oils (LSO), were utilized along with pentaerythritol (P) and glycerol (G) as polyols. FTIR and 1H NMR spectroscopies were conducted for the verification of alkyd structures. The synthesized ARs were assessed for their physico-chemical properties, including acid value, hydroxyl value, color, density, and viscosity. The performance of the resulting alkyd coatings, which are crucial for their commercial applications, was examined. Key factors such as drying time, hardness, adhesion, wettability, chemical and corrosion resistance, and UV stability were analyzed. All synthesized FDCA-based alkyd coatings demonstrate outstanding adhesion, good thermal stability up to 220 °C, and barrier properties for steel with |Z|0.02Hz ~106–107 Ohm cm−2, which render them suitable for the processing requirements of indoor coating applications. The higher temperature at 50% mass loss (T50) for SFO-P (397 °C) and LSO-P (413 °C) as compared to SFO-G (380 °C) and LSO-G (394 °C) indicated greater resistance to thermal breakdown when pentaerythritol was used as a polyol. Replacing glycerol with pentaerythritol in FDCA-based ARs resulted in a viscosity increase of 1.2–2.4 times and an enhancement in hardness from 2H to 3H. FDCA-based ARs exhibited decreased tack-free time, enhanced thermomechanical properties, and similar hardness as compared to phthalic anhydride-based ARs, underscoring the potential of FDCA as a sustainable alternative to phthalic anhydride in the formulation of ARs, integrating a greater proportion of renewable components for wood coating applications.

Schlagwörter

Stichwörter der Autor:innen

2,5-Furandicarboxylic acidalkyd resindecorative propertiesrenewable resourcessustainable coating

Autor:innen und Institutionen

  • Research Institute "Nanotechnologies and New Materials", Platov South-Russian State Polytechnic University, 346428 Novocherkassk, Russia.
  • Scientific and Educational Center "Materials", Don State Technical University, 344002 Rostov-on-Don, Russia.
  • Resource Center for Collective Use of the Scientific and Educational Center "Materials", Don State Technical University, 344002 Rostov-on-Don, Russia.

ORCID-Profile: Victor Klushin, Ivan Zubkov, Dmitry Petrenko, Anna Ulyankina

Förderung

  • Ministry of Science and Higher Education of the Russian Federation

Zitieren

APA

Klushin, V., Zubkov, I., Petrenko, D., Petrenko, A., Yurieva, T., Belichenko, T., Yatsenko, A., Kataria, Y., & Ulyankina, A. (2025). Biorenewable FDCA-Based Alkyd Resins for More Sustainable Wood Coatings. Polymers, 17(22), 3022. https://doi.org/10.3390/polym17223022

Vancouver

Klushin V, Zubkov I, Petrenko D, Petrenko A, Yurieva T, Belichenko T, et al. Biorenewable FDCA-Based Alkyd Resins for More Sustainable Wood Coatings. Polymers. 2025;17(22):3022. doi:10.3390/polym17223022

BibTeX
@article{Klushin2025,
  author = {Klushin, Victor and Zubkov, Ivan and Petrenko, Dmitry and Petrenko, Alina and Yurieva, Tatyana and Belichenko, Tatyana and Yatsenko, Aleksey and Kataria, Yash and Ulyankina, Anna},
  title = {Biorenewable FDCA-Based Alkyd Resins for More Sustainable Wood Coatings},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {22},
  pages = {3022},
  doi = {10.3390/polym17223022}
}
Kostenlos starten →