EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sweat-Resistant Parylene-C Encapsulated Conductive Textiles for Active Thermal Management

Shi Hu iD, Dan Wang iD, Mohanapriya Venkataraman iD, Jiří Militký iD, Dana Křemenáková, Martin Palušák

Polymers · 05.11.2025 · 17 (21) · 2952

DOI: 10.3390/polym17212952 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 05.11.2025. Verfasst von Shi Hu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Material Engineering, Faculty of Textile Engineering, Technical University of Liberec, Studenská 1402/2, 46117 Liberec, Czech Republic. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Czech Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of electro-thermal textiles has attracted growing interest as a promising approach for active thermal management in wearable systems. Metallic-coated fabrics can efficiently generate heat through the Joule effect; however, their long-term performance and safety are severely limited under perspiration due to metal ion release and corrosion. To overcome these challenges, this study introduces a Parylene-C encapsulation strategy for copper-coated polyethylene terephthalate nonwovens (CuPET) using a chemical vapor deposition (CVD) process. The conformal, biocompatible Parylene-C films (thickness 4–16 μm) act as effective protective barriers while preserving the porous textile structure. Morphological and comfort analyses demonstrate a controlled reduction in air permeability from 3100 to 1100 L·m−2·s−1, maintaining acceptable breathability. Electro-thermal measurements reveal rapid and uniform heating, reaching 40–45 °C within 2 min at 2 V, and the addition of a thermal insulation layer further enhances the Joule heating efficiency, increasing the steady-state temperature by approximately 6 °C. ICP–OES results show an ≈80% reduction in copper ion release (from 28.34 mg·L−1 to 5.80 mg·L−1) after artificial sweat exposure. This work demonstrates a scalable encapsulation route that effectively balances sweat protection, electrical stability, and thermal performance, paving the way for safe, durable, and actively heated smart textiles for advanced thermal insulation applications.

Schlagwörter

Stichwörter der Autor:innen

Parylene-C encapsulationchemical vapor deposition (CVD)copper-coated textileelectro-thermal heatingsmart wearable fabricssweat resistancethermal insulation

Autor:innen und Institutionen

  • Department of Material Engineering, Faculty of Textile Engineering, Technical University of Liberec, Studenská 1402/2, 46117 Liberec, Czech Republic.
  • Department of Environmental Chemistry, The Institute for Nanomaterials, Advanced Technologies and Innovation, Technical University of Liberec, Studentská 1402/2, 46001 Liberec, Czech Republic.

ORCID-Profile: Shi Hu, Dan Wang, Mohanapriya Venkataraman, Jiří Militký

Förderung

  • Czech Science Foundation

Zitieren

APA

Hu, S., Wang, D., Venkataraman, M., Militký, J., Křemenáková, D., & Palušák, M. (2025). Sweat-Resistant Parylene-C Encapsulated Conductive Textiles for Active Thermal Management. Polymers, 17(21), 2952. https://doi.org/10.3390/polym17212952

Vancouver

Hu S, Wang D, Venkataraman M, Militký J, Křemenáková D, Palušák M. Sweat-Resistant Parylene-C Encapsulated Conductive Textiles for Active Thermal Management. Polymers. 2025;17(21):2952. doi:10.3390/polym17212952

BibTeX
@article{Hu2025,
  author = {Hu, Shi and Wang, Dan and Venkataraman, Mohanapriya and Militký, Jiří and Křemenáková, Dana and Palušák, Martin},
  title = {Sweat-Resistant Parylene-C Encapsulated Conductive Textiles for Active Thermal Management},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {21},
  pages = {2952},
  doi = {10.3390/polym17212952}
}
Kostenlos starten →