Industrial Vegetable Oils: A Green Alternative for Enhancing Rubber Properties
Polymers · 30.10.2025 · 17 (21) · 2898
DOI: 10.3390/polym17212898 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 30.10.2025. Verfasst von Julijana Žeravica und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Technology Novi Sad, University of Novi Sad, 21000 Novi Sad, Serbia. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development, and Innovation of the Republic of Serbia, The Ministry of Science, Technological Development, and Innovation of the Republic of Serbia.
Abstract (Originalsprache)
This study investigates the viability of industrial hempseed oil as a sustainable extender oil in rubber compounding, addressing the urgent demand for alternatives to petroleum-based oils due to regulatory pressures on polycyclic aromatic hydrocarbons (PAH). We employed automated neural networks to analyze the physical and mechanical properties of rubber composites containing industrial hempseed oil, comparing them with six vegetable oils and three petroleum-based oils at extender oil concentrations from 0 to 30 phr. The results revealed that compounds with 20 phr of industrial hempseed oil and raw soybean oil exhibited the highest cure rate index values of 64.32 1/min. Rubber samples with industrial hempseed oil showed a significant 18% reduction in hardness compared to conventional oils, with the softest rubber measuring 40.5 Shore A hardness at 30 phr. Additionally, energy consumption during mixing was decreased by up to 12% for vegetable oil samples compared to mineral oils, enhancing processing efficiency. The neural network approach yielded more accurate predictions of the cure rate index, Shore A hardness, and power consumption during rubber mixing, with a validation performance exceeding 99.2%. Sensitivity analysis identified key factors, including oil content and surface tension, influencing rubber hardness. Overall, this study underscores the potential of industrial hempseed oil as an effective, eco-friendly substitute for conventional mineral oils, contributing to more sustainable practices in the rubber industry.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Technology Novi Sad, University of Novi Sad, 21000 Novi Sad, Serbia.
ORCID-Profile: Julijana Žeravica, Olga Govedarica, Mirjana Jovičić, Sonja Stojanov, Dragan Govedarica
Förderung
- Ministry of Science, Technological Development, and Innovation of the Republic of Serbia
- The Ministry of Science, Technological Development, and Innovation of the Republic of Serbia
Zitieren
APA
Žeravica, J., Govedarica, O., Jovičić, M., Stojanov, S., & Govedarica, D. (2025). Industrial Vegetable Oils: A Green Alternative for Enhancing Rubber Properties. Polymers, 17(21), 2898. https://doi.org/10.3390/polym17212898
Vancouver
Žeravica J, Govedarica O, Jovičić M, Stojanov S, Govedarica D. Industrial Vegetable Oils: A Green Alternative for Enhancing Rubber Properties. Polymers. 2025;17(21):2898. doi:10.3390/polym17212898
BibTeX
@article{eravica2025,
author = {Žeravica, Julijana and Govedarica, Olga and Jovičić, Mirjana and Stojanov, Sonja and Govedarica, Dragan},
title = {Industrial Vegetable Oils: A Green Alternative for Enhancing Rubber Properties},
journal = {Polymers},
year = {2025},
volume = {17},
number = {21},
pages = {2898},
doi = {10.3390/polym17212898}
}
EUVIMED