Influence of Fabric Support on Improving the Layer-by-Layer Polyethersulfone Membrane Performance
Polymers · 23.10.2025 · 17 (21) · 2825
DOI: 10.3390/polym17212825 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 23.10.2025. Verfasst von Ahmed A Bhran und 3 weiteren Autor:innen. Beteiligte Einrichtung: Chemical Engineering Department, College of Engineering, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh 11432, Saudi Arabia. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Imam Mohammad ibn Saud Islamic University.
Abstract (Originalsprache)
This work is based on studying the effect of different kinds of support on the prepared reverse osmosis membranes. Different kinds of woven and non-woven supports were tested and characterized to select the best one for RO membrane preparation. The prepared membrane on polyester woven support (M1ws) provides 39.9 LMH permeate flux using a piperazine coagulation bath during membrane preparation, while polyester non-woven support (M2ns) exhibits the highest salt rejection percentage, which was 92.2% using a Melamine coagulation bath. The mechanical properties for preparing membranes using supports were arranged in descending order as follows: M1ws > M2ns > M3np. The membrane on polypropylene support (M3np) provides the lowest mechanical properties.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Chemical Engineering Department, College of Engineering, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh 11432, Saudi Arabia.
- Water Pollution Research Department, Environment and Climate Change Research Institute, National Research Centre, Giza 12622, Egypt.
- Chemical Engineering & Pilot Plant Department, Engineering Research Institute, New and Renewable Energy, National Research Centre, Giza 12622, Egypt.
ORCID-Profile: Ahmed A Bhran
Förderung
- Imam Mohammad ibn Saud Islamic University
Zitieren
APA
Bhran, A. A., Gadallah, A. G., Mansor, E. S., & Abdallah, H. (2025). Influence of Fabric Support on Improving the Layer-by-Layer Polyethersulfone Membrane Performance. Polymers, 17(21), 2825. https://doi.org/10.3390/polym17212825
Vancouver
Bhran AA, Gadallah AG, Mansor ES, Abdallah H. Influence of Fabric Support on Improving the Layer-by-Layer Polyethersulfone Membrane Performance. Polymers. 2025;17(21):2825. doi:10.3390/polym17212825
BibTeX
@article{Bhran2025,
author = {Bhran, Ahmed A and Gadallah, Abdelrahman G and Mansor, Eman S and Abdallah, Heba},
title = {Influence of Fabric Support on Improving the Layer-by-Layer Polyethersulfone Membrane Performance},
journal = {Polymers},
year = {2025},
volume = {17},
number = {21},
pages = {2825},
doi = {10.3390/polym17212825}
}
EUVIMED