EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ethylene-Vinyl Acetate Copolymer as a Polyfunctional Modifier for Low-Viscosity Photosensitive Compositions

Dmitriy A Bazhanov iD, Uliana V Nikulova iD, Ramil R Khasbiullin iD, Nikita Yu Budylin iD, Elizaveta V Ermakova iD, Aleksey V Shapagin iD

Polymers · 17.10.2025 · 17 (20) · 2787

DOI: 10.3390/polym17202787 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.10.2025. Verfasst von Dmitriy A Bazhanov und 5 weiteren Autor:innen. Beteiligte Einrichtung: Frumkin Institute of Physical Chemistry and Electrochemistry Russian Academy of Sciences (IPCE RAS), 31-4, Leninsky Prospect, 119071 Moscow, Russia. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The article presents the results of a study of the possibility of using heat-treated ethylene-vinyl acetate copolymer (EVA) as a thermoplastic modifier in a photosensitive composition based on tert-butyl acrylate (tBA). The use of such a modifier in 3D printing compositions is important for improving their physical and mechanical properties at low temperatures. An attempt was also made to use EVA as a polymer chain brancher. The molecular structure of the components and their compositions, rheology, curing kinetics, and phase organization of photocured systems were studied using FTIR and NMR spectroscopy, spectrophotometry, rheometry, Photo-DSC, and scanning electron microscopy. It was found that heat treatment of EVA allows the formation of single C=C bonds in macromolecules, which are necessary for a potential crosslinking agent with tBA. It was shown that EVA effectively functions as a thickener and modifier: with an increase in the modifier concentration, the nature of the composition flow changes from Newtonian to pseudoplastic, the rate of the photochemical polymerization reaction decreases, and the degree of conversion of the system decreases. However, the formation of a heterogeneous phase structure and the absence of a continuous spatial network of chemical bonds prevent the use of EVA simultaneously as a functional additive and crosslinking agent.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingcrosslinking agentphotopolymerizationrheologystructure formation

Autor:innen und Institutionen

  • Frumkin Institute of Physical Chemistry and Electrochemistry Russian Academy of Sciences (IPCE RAS), 31-4, Leninsky Prospect, 119071 Moscow, Russia.

ORCID-Profile: Dmitriy A Bazhanov, Uliana V Nikulova, Ramil R Khasbiullin, Nikita Yu Budylin, Elizaveta V Ermakova, Aleksey V Shapagin

Förderung

  • Ministry of Science and Higher Education of the Russian Federation

Zitieren

APA

Bazhanov, D. A., Nikulova, U. V., Khasbiullin, R. R., Budylin, N. Y., Ermakova, E. V., & Shapagin, A. V. (2025). Ethylene-Vinyl Acetate Copolymer as a Polyfunctional Modifier for Low-Viscosity Photosensitive Compositions. Polymers, 17(20), 2787. https://doi.org/10.3390/polym17202787

Vancouver

Bazhanov DA, Nikulova UV, Khasbiullin RR, Budylin NY, Ermakova EV, Shapagin AV. Ethylene-Vinyl Acetate Copolymer as a Polyfunctional Modifier for Low-Viscosity Photosensitive Compositions. Polymers. 2025;17(20):2787. doi:10.3390/polym17202787

BibTeX
@article{Bazhanov2025,
  author = {Bazhanov, Dmitriy A and Nikulova, Uliana V and Khasbiullin, Ramil R and Budylin, Nikita Yu and Ermakova, Elizaveta V and Shapagin, Aleksey V},
  title = {Ethylene-Vinyl Acetate Copolymer as a Polyfunctional Modifier for Low-Viscosity Photosensitive Compositions},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {20},
  pages = {2787},
  doi = {10.3390/polym17202787}
}
Kostenlos starten →