Biodegradable PLA/PHB Composites with Inorganic Fillers and Modifiers
Polymers · 10.10.2025 · 17 (20) · 2721
DOI: 10.3390/polym17202721 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 10.10.2025. Verfasst von Jozef Feranc und 13 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Natural and Synthetic Polymers, Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava, Radlinského 9, 8…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovak Research and Development Agency, Research and Development Agency.
Abstract (Originalsprache)
The work is focused on the study of the influence of different types of inorganic fillers, in combination with modifiers, on the rheological, thermal, and mechanical properties of a biodegradable mixture based on PLA/PHB. Ten types of inorganic fillers based on talc, magnesium hydroxide, aluminum hydroxide, calcium carbonate, and silicon dioxide were used in the study, along with three types of modifiers. It was concluded that fillers containing reactive OH groups on their surface act as strong pro-degradants in PLA/PHB blends, and their degrading effect can be suppressed by the addition of reactive modifiers. Each modifier acts specifically with different types of fillers. Therefore, it is necessary to select a suitable filler/modifier combination not only for fillers with different chemical compositions but also for fillers with different morphologies within the same chemical type. Moreover, the preparation of PLA/PHB/magnesium hydroxide blends with suitable processing and application properties opens the possibility of developing environmentally friendly polymeric materials with a reduced flammability. The addition of talc, which has a platelet structure, can increase the barrier properties of the mixture.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Natural and Synthetic Polymers, Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava, Radlinského 9, 812 37 Bratislava, Slovakia.
- Audia Plastics s.r.o., Voderady 426, 919 42 Voderady, Slovakia.
ORCID-Profile: Jozef Feranc, Martina Repiská, Ján Kruželák, Pavol Alexy
Förderung
- Slovak Research and Development Agency
- Research and Development Agency
Zitieren
APA
Feranc, J., Repiská, M., Plavec, R., Tomanová, K., Ďurfina, M., Vanovčanová, Z., Vašková, I., Omaníková, L., Fogašová, M., Hlaváčiková, S., Kruželák, J., Kramárová, Z., Oswald, E., & Alexy, P. (2025). Biodegradable PLA/PHB Composites with Inorganic Fillers and Modifiers. Polymers, 17(20), 2721. https://doi.org/10.3390/polym17202721
Vancouver
Feranc J, Repiská M, Plavec R, Tomanová K, Ďurfina M, Vanovčanová Z, et al. Biodegradable PLA/PHB Composites with Inorganic Fillers and Modifiers. Polymers. 2025;17(20):2721. doi:10.3390/polym17202721
BibTeX
@article{Feranc2025,
author = {Feranc, Jozef and Repiská, Martina and Plavec, Roderik and Tomanová, Katarína and Ďurfina, Michal and Vanovčanová, Zuzana and Vašková, Ida and Omaníková, Leona and Fogašová, Mária and Hlaváčiková, Slávka and Kruželák, Ján and Kramárová, Zuzana and Oswald, Eduard and Alexy, Pavol},
title = {Biodegradable PLA/PHB Composites with Inorganic Fillers and Modifiers},
journal = {Polymers},
year = {2025},
volume = {17},
number = {20},
pages = {2721},
doi = {10.3390/polym17202721}
}
EUVIMED