EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Processing Parameters on the Mechanical Behavior of 3D-Printed Basalt Moon Dust Reinforced Polylactic Acid Composites

Lucian Alexander-Roy, Meelad Ranaiefar iD, Mrityunjay Singh, Michael Halbig

Polymers · 04.10.2025 · 17 (19) · 2685

DOI: 10.3390/polym17192685 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 04.10.2025. Verfasst von Lucian Alexander-Roy und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Case Western Reserve University, 10900 Euclid Avenue, Cleveland, OH 44106, USA. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ohio Space Grant Consortium, Ohio Aerospace Institute.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Advanced composite materials and manufacturing technologies are critical to sustain human presence in space. Mechanical testing and analysis are needed to elucidate the effect of processing parameters on composites’ material properties. In this study, test specimens are 3D printed via a fused-filament fabrication (FFF) approach from a basalt moon dust-polylactic acid (BMD-PLA) composite filament and from pure PLA filament. Compression and tensile testing were conducted to determine the yield strength, ultimate strength, and Young’s modulus of specimens fabricated under several processing conditions. The maximum compressive yield strength for the BMD-reinforced samples is 27.68 MPa with print parameters of 100% infill, one shell, and 90° print orientation. The maximum compressive yield strength for the PLA samples is 63.05 MPa with print parameters of 100% infill, three shells, and 0° print orientation. The composite samples exhibit an increase in strength when layer lines are aligned with loading axis, whereas the PLA samples decreased in strength. This indicates a fundamental difference in how the composite behaves in comparison to the pure matrix material. In tension, test specimens have unpredictable failure modes and often broke outside the gauge length. A portion of the tension test data is included to help guide future work.

Schlagwörter

Stichwörter der Autor:innen

3D printingcompositesin situ resource utilizationregolith simulant

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Case Western Reserve University, 10900 Euclid Avenue, Cleveland, OH 44106, USA.
  • NASA Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 44135, USA.
  • Ohio Aerospace Institute, 22800 Cedar Point Road, Cleveland, OH 44142, USA.

ORCID-Profile: Meelad Ranaiefar

Förderung

  • Ohio Space Grant Consortium
  • Ohio Aerospace Institute

Zitieren

APA

Alexander-Roy, L., Ranaiefar, M., Singh, M., & Halbig, M. (2025). Effect of Processing Parameters on the Mechanical Behavior of 3D-Printed Basalt Moon Dust Reinforced Polylactic Acid Composites. Polymers, 17(19), 2685. https://doi.org/10.3390/polym17192685

Vancouver

Alexander-Roy L, Ranaiefar M, Singh M, Halbig M. Effect of Processing Parameters on the Mechanical Behavior of 3D-Printed Basalt Moon Dust Reinforced Polylactic Acid Composites. Polymers. 2025;17(19):2685. doi:10.3390/polym17192685

BibTeX
@article{AlexanderRoy2025,
  author = {Alexander-Roy, Lucian and Ranaiefar, Meelad and Singh, Mrityunjay and Halbig, Michael},
  title = {Effect of Processing Parameters on the Mechanical Behavior of 3D-Printed Basalt Moon Dust Reinforced Polylactic Acid Composites},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {19},
  pages = {2685},
  doi = {10.3390/polym17192685}
}
Kostenlos starten →