EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

LATP-Enhanced Polymer Electrolyte for an Integrated Solid-State Battery

Xianzheng Liu iD, Nashrah Hani Jamadon iD, Liancheng Zheng, Rongji Tang, Xiangjun Ren

Polymers · 02.10.2025 · 17 (19) · 2673

DOI: 10.3390/polym17192673 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 02.10.2025. Verfasst von Xianzheng Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Shandong Huayu University of Technology, Dezhou 253034, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong Huayu University of Technology, New Energy Vehicle Intelligent Network Technology Shandong Province Higher Education Institutions Future Industry Engineering Research Centre Project, Ministry of Higher Education Malaysia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Traditional liquid electrolyte batteries face safety concerns such as leakage and flammability, while further optimization has reached a bottleneck. Solid electrolytes are therefore considered a promising solution. Here, a PEO–LiTFSI–LATP (PELT) composite electrolyte was developed by incorporating nanosized Li1.3Al0.3Ti1.7(PO4)3 fillers into a polyethylene oxide matrix, effectively reducing crystallinity, enhancing mechanical robustness, and providing additional Li+ transport channels. The PELT electrolyte exhibited an electrochemical stability window of 4.9 V, an ionic conductivity of 1.2 × 10−4 S·cm−1 at 60 °C, and a Li+ transference number (tLi+) of 0.46, supporting stable Li plating/stripping for over 600 h in symmetric batteries. More importantly, to address poor electrode–electrolyte contact in conventional layered cells, we proposed an integrated electrode–electrolyte architecture by in situ coating the PELT precursor directly onto LiFePO4 cathodes. This design minimized interfacial impedance, improved ion transport, and enhanced electrochemical stability. The integrated PELT/LFP battery retained 74% of its capacity after 200 cycles at 1 A·g−1 and showed superior rate capability compared with sandwich-type batteries. These results highlight that coupling LATP-enhanced polymer electrolytes with an integrated architecture is a promising pathway toward high-safety, high-performance solid-state lithium-ion batteries.

Schlagwörter

Stichwörter der Autor:innen

conductive materialsintegrated electrodelithium-ion batterypolymer electrolytessolid electrolyte

Autor:innen und Institutionen

  • College of Mechanical Engineering, Shandong Huayu University of Technology, Dezhou 253034, China.
  • Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi 43600, Malaysia.

ORCID-Profile: Xianzheng Liu, Nashrah Hani Jamadon

Förderung

  • Shandong Huayu University of Technology
  • New Energy Vehicle Intelligent Network Technology Shandong Province Higher Education Institutions Future Industry Engineering Research Centre Project
  • Ministry of Higher Education Malaysia

Zitieren

APA

Liu, X., Jamadon, N. H., Zheng, L., Tang, R., & Ren, X. (2025). LATP-Enhanced Polymer Electrolyte for an Integrated Solid-State Battery. Polymers, 17(19), 2673. https://doi.org/10.3390/polym17192673

Vancouver

Liu X, Jamadon NH, Zheng L, Tang R, Ren X. LATP-Enhanced Polymer Electrolyte for an Integrated Solid-State Battery. Polymers. 2025;17(19):2673. doi:10.3390/polym17192673

BibTeX
@article{Liu2025,
  author = {Liu, Xianzheng and Jamadon, Nashrah Hani and Zheng, Liancheng and Tang, Rongji and Ren, Xiangjun},
  title = {LATP-Enhanced Polymer Electrolyte for an Integrated Solid-State Battery},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {19},
  pages = {2673},
  doi = {10.3390/polym17192673}
}
Kostenlos starten →