EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Polymer Functional Layers for Perovskite Solar Cells

Jinho Lee iD, Jaehyeok Kang, Jong-Hoon Lee, Soonil Hong iD

Polymers · 26.09.2025 · 17 (19) · 2607

DOI: 10.3390/polym17192607 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 26.09.2025. Verfasst von Jinho Lee und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Incheon National University, Incheon 22012, Republic of Korea. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 106 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Energy Technology Evaluation and Planning, KRICT Core project, National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Perovskite solar cells (PSCs) are next-generation solar cells; they are replacing silicon-based solar cells due to their higher efficiency, greater cost-effectiveness, and enhanced potential for various applications. Exceeding the efficiency of crystalline silicon-based solar cells, the commercialization of PSCs has driven not only the development of perovskite photoactive materials but also charge transport layer advancements, interfacial engineering, and processing technologies. PSCs were developed later than dye-sensitized solar cells and organic solar cells; the adoption of techniques previously employed in these technologies is significant to enhancing their performance. Among them, polymers are widely employed in perovskite solar cells to facilitate efficient charge transport, provide interfacial passivation, enhance mechanical flexibility, enable solution-based processing, and improve environmental stability. In this review, we highlight the roles of polymer materials as charge transport layers, interfacial layers, and other functional layers for highly efficient and stable PSCs.

Schlagwörter

Stichwörter der Autor:innen

functional layersperovskite solar cellspolymers

Autor:innen und Institutionen

  • Department of Physics, Incheon National University, Incheon 22012, Republic of Korea.
  • Department of Advanced Materials Engineering, Kyonggi University, Suwon 16227, Republic of Korea.
  • Division of Advanced Materials, Korea Research Institute of Chemical Technology (KRICT), Daejeon 34114, Republic of Korea.

ORCID-Profile: Jinho Lee, Soonil Hong

Förderung

  • Korea Institute of Energy Technology Evaluation and Planning
  • KRICT Core project
  • National Research Foundation of Korea
  • Ministry of SMEs and Startups
  • Korean government
  • Korea government

Zitieren

APA

Lee, J., Kang, J., Lee, J. H., & Hong, S. (2025). Polymer Functional Layers for Perovskite Solar Cells. Polymers, 17(19), 2607. https://doi.org/10.3390/polym17192607

Vancouver

Lee J, Kang J, Lee JH, Hong S. Polymer Functional Layers for Perovskite Solar Cells. Polymers. 2025;17(19):2607. doi:10.3390/polym17192607

BibTeX
@article{Lee2025,
  author = {Lee, Jinho and Kang, Jaehyeok and Lee, Jong-Hoon and Hong, Soonil},
  title = {Polymer Functional Layers for Perovskite Solar Cells},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {19},
  pages = {2607},
  doi = {10.3390/polym17192607}
}
Kostenlos starten →