EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Infiltration-Assisted Mechanical Strengthening of 3D-Printed Polypropylene Lattice and Thin-Walled Tube Structures

Hakkı Özer iD

Polymers · 26.09.2025 · 17 (19) · 2604

DOI: 10.3390/polym17192604 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.09.2025. Verfasst von Hakkı Özer. Beteiligte Einrichtung: Department of Automotive Engineering, Faculty of Engineering, Bursa Uludag University, Bursa 16059, Turkey. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a viscosity-controlled epoxy infiltration strategy to mitigate common production defects, such as interlayer bond weaknesses, step gaps, and surface roughness, in 3D-printed polypropylene lattice and tube structures. To address these issues, epoxy resin infiltration was applied at four distinct viscosity levels. The infiltration process, facilitated by ultrasonic assistance, improved epoxy penetration into the internal structure. The results indicate that this method effectively reduced micro-voids and surface irregularities. Variations in epoxy viscosity significantly influenced the final internal porosity and the thickness of the epoxy film formed on the surface. These structural changes directly affected the energy absorption (EA) and specific energy absorption (SEA) of the specimens. While performance was enhanced across all viscosity levels, the medium-viscosity specimens (L-V2 and L-V3), with a mass uptake of ~37%, yielded the most favorable outcome, achieving high SEA (0.84 J/g) and EA (252 J) values. This improvement was mainly attributed to the epoxy filling internal voids and defects. Mechanical test results were further supported by SEM observations and validated through statistical correlation analyses. This work constitutes one of the first comprehensive studies to employ epoxy infiltration for defect mitigation in 3D-printed polypropylene structures. The proposed method offers a promising pathway to enhance the performance of lightweight, impact-resistant 3D-printed structures for advanced engineering applications.

Schlagwörter

Stichwörter der Autor:innen

3D-printed polymer structuresenergy absorptionepoxy infiltrationlattice structuresmechanical strengtheningpolypropylenethin-walled structures

Autor:innen und Institutionen

  • Department of Automotive Engineering, Faculty of Engineering, Bursa Uludag University, Bursa 16059, Turkey.

ORCID-Profile: Hakkı Özer

Zitieren

APA

Özer, H. (2025). Infiltration-Assisted Mechanical Strengthening of 3D-Printed Polypropylene Lattice and Thin-Walled Tube Structures. Polymers, 17(19), 2604. https://doi.org/10.3390/polym17192604

Vancouver

Özer H. Infiltration-Assisted Mechanical Strengthening of 3D-Printed Polypropylene Lattice and Thin-Walled Tube Structures. Polymers. 2025;17(19):2604. doi:10.3390/polym17192604

BibTeX
@article{zer2025,
  author = {Özer, Hakkı},
  title = {Infiltration-Assisted Mechanical Strengthening of 3D-Printed Polypropylene Lattice and Thin-Walled Tube Structures},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {19},
  pages = {2604},
  doi = {10.3390/polym17192604}
}
Kostenlos starten →