EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Thickness on the Uniaxial Compression Failure Behavior of CFRP Laminates

Zixing Qin, Huiming Ding iD, Shiyang Zhu, Can Jin, Jian Wang, Jiaxin Li, Han Wang

Polymers · 17.09.2025 · 17 (18) · 2518

DOI: 10.3390/polym17182518 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.09.2025. Verfasst von Zixing Qin und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Foundation of Donghai Laboratory, Key Research and Development Program of Jilin Province, China Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon Fiber Reinforced Composite (CFRP) is widely used in deep-sea pressure-resistant structures. With the increase in submergence depth demand leading to the increase in the thickness of the CFRP shell plate, there is a significant thickness effect on its compression performance. In order to study the mechanism of the decrease in compression performance of the laminate, uniaxial compression tests, interlaminar shear tests, out-of-plane tensile tests, damage characterization, and FEM analysis were carried out on three thicknesses of laminates. The results showed that the compressive strength, interlaminar shear strength, out-of-plane tensile strength of laminates and FEM compression model decreased by 10.3%, 12.7%, 23.6%, and 13.6% when the thickness of the laminate was increased from 2 mm to 12 mm. Concurrently, the compression failure mechanism is transformed from the overall strength failure to the instability–crush failure mode caused by the initial delamination. The effects of out-of-plane tensile strength and interlaminar shear strength on compressive properties were also considered. It provides support for the regulation of compression performance of large-thickness laminates and the safety of deep-sea pressure-resistant structures in service.

Schlagwörter

Stichwörter der Autor:innen

carbon fiber compositescompression propertiescompression-resistant structuresthick laminate

Autor:innen und Institutionen

  • School of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China.
  • College of Energy Engineering, Zhejiang University, Hangzhou 310027, China.
  • Donghai Laboratory, Zhoushan 316021, China.
  • Wuhan Second Ship Design and Research Institute, Wuhan 430205, China.
  • Jilin Guoxing Composite Material Co., Ltd., Jilin 132000, China.

ORCID-Profile: Huiming Ding

Förderung

  • Science Foundation of Donghai Laboratory
  • Key Research and Development Program of Jilin Province
  • China Postdoctoral Science Foundation

Zitieren

APA

Qin, Z., Ding, H., Zhu, S., Jin, C., Wang, J., Li, J., & Wang, H. (2025). Effect of Thickness on the Uniaxial Compression Failure Behavior of CFRP Laminates. Polymers, 17(18), 2518. https://doi.org/10.3390/polym17182518

Vancouver

Qin Z, Ding H, Zhu S, Jin C, Wang J, Li J, et al. Effect of Thickness on the Uniaxial Compression Failure Behavior of CFRP Laminates. Polymers. 2025;17(18):2518. doi:10.3390/polym17182518

BibTeX
@article{Qin2025,
  author = {Qin, Zixing and Ding, Huiming and Zhu, Shiyang and Jin, Can and Wang, Jian and Li, Jiaxin and Wang, Han},
  title = {Effect of Thickness on the Uniaxial Compression Failure Behavior of CFRP Laminates},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {18},
  pages = {2518},
  doi = {10.3390/polym17182518}
}
Kostenlos starten →