Artificial Neural Network Prediction of Mechanical Properties in Mycelium-Based Biocomposites
Polymers · 17.09.2025 · 17 (18) · 2506
DOI: 10.3390/polym17182506 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 17.09.2025. Verfasst von Štěpán Hýsek und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Natural Sciences and Sustainable Resources, Institute of Wood Technology and Renewable Materials, BOKU University, Konrad-Lorenz-Straße…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: HORIZON.1.2 - Marie Skłodowska-Curie Actions (MSCA), Faculty of Forestry and Wood Sciences, Czech University of Life Sciences Prague, HORIZON-MSCA-2022-PF-01-01.
Abstract (Originalsprache)
Mycelium-based biocomposites (MBBs) represent a sustainable alternative to synthetic composites, as they are produced from lignocellulosic substrates bonded by fungal mycelium. Their mechanical performance depends on multiple interacting factors, including the substrate composition, fungal species, and processing conditions, which makes property optimisation challenging. In this study, an artificial neural network (ANN) model was developed to predict two mechanical properties of MBBs, namely internal bonding (IB) and compressive strength (CS). An ANN model was trained on experimental data, using the substrate composition, fungal species, and physical properties of MBBs. The ANN predictions were compared with measured values, and the model accuracy was evaluated. The results showed that the ANN achieved a high predictive accuracy, with coefficients of determination of 0.992 for IB and 0.979 for CS. IB values were predicted more precisely than CS, likely due to microstructural heterogeneities. The heterogeneities were visualised using scanning electron microscopy. Composites produced with Ganoderma sessile and Trametes versicolor exhibited the highest IB. Interestingly, Trametes versicolor achieved the highest CS on virgin wood particles but the lowest values on recycled wood, underlining the strong influence of the substrate quality. The study demonstrates that ANNs can effectively predict the mechanical properties, reducing the number of experimental tests needed for material characterisation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Natural Sciences and Sustainable Resources, Institute of Wood Technology and Renewable Materials, BOKU University, Konrad-Lorenz-Straße 24, 3430 Tulln, Austria.
- Department of Horticulture, Faculty of Agrobiology, Food and Natural Resources, Czech University of Life Sciences Prague, Kamýcká 129, Suchdol, 16500 Prague, Czech Republic.
- Faculty of Forestry and Wood Sciences, Czech University of Life Sciences Prague, Kamýcká 129, Suchdol, 16500 Prague, Czech Republic.
ORCID-Profile: Štěpán Hýsek, Miroslav Jozífek, Benjamín Petržela, Miroslav Němec
Förderung
- HORIZON.1.2 - Marie Skłodowska-Curie Actions (MSCA)
- Faculty of Forestry and Wood Sciences, Czech University of Life Sciences Prague
- HORIZON-MSCA-2022-PF-01-01
- Faculty of Forestry and Wood Sciences of the Czech University of Life Sciences Prague
Zitieren
APA
Hýsek, Š., Jozífek, M., Petržela, B., & Němec, M. (2025). Artificial Neural Network Prediction of Mechanical Properties in Mycelium-Based Biocomposites. Polymers, 17(18), 2506. https://doi.org/10.3390/polym17182506
Vancouver
Hýsek Š, Jozífek M, Petržela B, Němec M. Artificial Neural Network Prediction of Mechanical Properties in Mycelium-Based Biocomposites. Polymers. 2025;17(18):2506. doi:10.3390/polym17182506
BibTeX
@article{Hsek2025,
author = {Hýsek, Štěpán and Jozífek, Miroslav and Petržela, Benjamín and Němec, Miroslav},
title = {Artificial Neural Network Prediction of Mechanical Properties in Mycelium-Based Biocomposites},
journal = {Polymers},
year = {2025},
volume = {17},
number = {18},
pages = {2506},
doi = {10.3390/polym17182506}
}
EUVIMED