EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Computational and Experimental Optimization of Injection-Molded Compliant Constant-Torque Mechanisms in Polymeric Materials

Tran Minh The Uyen, Hai Nguyen Le Dang, Van-Thuc Nguyen, Minh-Tai Le iD, Nguyen Van Son, Thanh Trung Do iD, Le Quang Linh, Vu Manh Hoang, Phi Hoang Minh, Pham Son Minh iD

Polymers · 17.09.2025 · 17 (18) · 2505

DOI: 10.3390/polym17182505 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.09.2025. Verfasst von Tran Minh The Uyen und 9 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Ho Chi Minh City University of Technology and Education, Ho Chi Minh City 71307, Vietnam. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ho Chi Minh City University of Technology and Education, HCMC University of Technology and Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this research, we explore the computational and experimental optimization of compliant constant-torque mechanisms (CTMs) fabricated via injection molding using polymeric materials. We investigate how geometric variations influence the torsional strength of CTMs through numerical simulation, experimental validation, and artificial neural network (ANN) modeling. Four different geometries with the same overall dimensions were designed and analyzed to quantify their mechanical performance. The results reveal that the geometric configuration significantly affected the torsional behavior of the CTMs, with circular cross-sections demonstrating superior strength. Moreover, the ANN model exhibited a high prediction accuracy and minimal relative errors, closely aligning with the experimental outcomes. Despite this, discrepancies between our numerical and experimental results suggest that further refinements in material modeling and manufacturing processes are warranted. In this paper, we emphasize the importance of integrating computational (CAE), artificial neural networks (ANNs) and experimental techniques for optimizing polymer-based CTMs. CAE simulations for Model 4 showed a constant-torque section from 23–44 degrees with 0.142 N·m torque, while experimental and ANN results indicated a longer range (20–45/46 degrees) with higher torque values (0.164 N·m). Experimental and ANN predictions for Model 4 showed an approximate 97% similarity. While these findings represent a foundational step, the characteristics of polymer CTMs suggest potential relevance for advancing applications in precision engineering, biomedical devices, and soft robotics, pending further application-specific validation.

Schlagwörter

Stichwörter der Autor:innen

ANNCAEconstant-torque mechanisms (CTMs)experimentinjection molding

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering, Ho Chi Minh City University of Technology and Education, Ho Chi Minh City 71307, Vietnam.

ORCID-Profile: Minh-Tai Le, Thanh Trung Do, Pham Son Minh

Förderung

  • Ho Chi Minh City University of Technology and Education
  • HCMC University of Technology and Education

Zitieren

APA

Uyen, T. M. T., Dang, H. N. L., Nguyen, V. T., Le, M. T., Son, N. V., Do, T. T., Linh, L. Q., Hoang, V. M., Minh, P. H., & Minh, P. S. (2025). Computational and Experimental Optimization of Injection-Molded Compliant Constant-Torque Mechanisms in Polymeric Materials. Polymers, 17(18), 2505. https://doi.org/10.3390/polym17182505

Vancouver

Uyen TMT, Dang HNL, Nguyen VT, Le MT, Son NV, Do TT, et al. Computational and Experimental Optimization of Injection-Molded Compliant Constant-Torque Mechanisms in Polymeric Materials. Polymers. 2025;17(18):2505. doi:10.3390/polym17182505

BibTeX
@article{Uyen2025,
  author = {Uyen, Tran Minh The and Dang, Hai Nguyen Le and Nguyen, Van-Thuc and Le, Minh-Tai and Son, Nguyen Van and Do, Thanh Trung and Linh, Le Quang and Hoang, Vu Manh and Minh, Phi Hoang and Minh, Pham Son},
  title = {Computational and Experimental Optimization of Injection-Molded Compliant Constant-Torque Mechanisms in Polymeric Materials},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {18},
  pages = {2505},
  doi = {10.3390/polym17182505}
}
Kostenlos starten →