Air-Assisted Sprayed Flexible Cellulose Acetate/Chitosan Materials for Food Packaging
Polymers · 13.09.2025 · 17 (18) · 2479
DOI: 10.3390/polym17182479 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 13.09.2025. Verfasst von Nasrin Moshfeghi Far und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering and Chemical Engineering, Universidad Carlos III de Madrid, Av. Universidad 30, 28911 Leganés, Spain. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CONEX-Plus program of Universidad Carlos III de Madrid (UC3M) and the European Commission, Ministerio de Ciencia, Innovación y Universidades of Spain, University Carlos III de Madrid, Fondos de Investigación of Fco. Javier González Benito.
Abstract (Originalsprache)
Cellulose and chitin are the most abundant natural polymers, and their exploitation paves the way for sustainable materials and products. This work investigates the preparation of composites based on acetylated cellulose and partially deacetylated chitin, i.e., chitosan, using versatile and robust air-assisted solution spraying (AASS), a potential method for preparing materials both in situ and ex situ. These materials, in the form of films, despite being prepared from high-molecular-weight and rigid biopolymers, show high flexibility (Young’s moduli below 1 GPa), outstanding mechanical properties (tensile strengths above 19 MPa and strain at failure higher than 2%), and bioactivity towards E. coli. The unprecedented flexibility, obtained without the use of any plasticizer or by casting with humidity control, is a direct consequence of the specific film morphology, whereby films are constituted from merging droplets. Depending on the solution properties (viscosity, surface tension), various droplet sizes are obtained, thus influencing the roughness and indirectly the wettability. Wettability analysis towards water and oil revealed higher contact angles towards both fluids as the content of chitosan increases in the composite what directly impacts packaging applications by better protecting the food. Besides this, higher chitosan content in the composite (7.5% w/w) enabled bioactivity against E. coli, where colony development was inhibited on the film surface compared with the neat cellulose acetate. This study shows a very high potential for AASS for obtaining uniform thin flexible films for food packaging applications, allowing faster drying and lower energy consumption than other film-forming techniques.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Engineering and Chemical Engineering, Universidad Carlos III de Madrid, Av. Universidad 30, 28911 Leganés, Spain.
- Novel Materials and Nanotechnology Group, Institute of Agrochemistry and Food Technology (IATA), Spanish Council for Scientific Research (CSIC), Calle Catedrático Agustín Escardino Benlloch 7, 46980 Paterna, Spain.
ORCID-Profile: Ana Kramar, Javier González-Benito
Förderung
- CONEX-Plus program of Universidad Carlos III de Madrid (UC3M) and the European Commission
- Ministerio de Ciencia, Innovación y Universidades of Spain
- University Carlos III de Madrid, Fondos de Investigación of Fco. Javier González Benito
- strategic Action in Multifunctional Nanocomposite Materials
Zitieren
APA
Moshfeghi Far, N., Kramar, A., & González-Benito, J. (2025). Air-Assisted Sprayed Flexible Cellulose Acetate/Chitosan Materials for Food Packaging. Polymers, 17(18), 2479. https://doi.org/10.3390/polym17182479
Vancouver
Moshfeghi Far N, Kramar A, González-Benito J. Air-Assisted Sprayed Flexible Cellulose Acetate/Chitosan Materials for Food Packaging. Polymers. 2025;17(18):2479. doi:10.3390/polym17182479
BibTeX
@article{MoshfeghiFar2025,
author = {Moshfeghi Far, Nasrin and Kramar, Ana and González-Benito, Javier},
title = {Air-Assisted Sprayed Flexible Cellulose Acetate/Chitosan Materials for Food Packaging},
journal = {Polymers},
year = {2025},
volume = {17},
number = {18},
pages = {2479},
doi = {10.3390/polym17182479}
}
EUVIMED