EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Durability of Basalt- and Glass Fiber-Reinforced Polymers: Influence of Internal Stresses, Mass Loss Modeling, and Mechanical/Thermomechanical Properties Under Extreme Cold Climate Exposure

Anatoly K Kychkin iD, Oleg V Startsev iD, Mikhail P Lebedev iD, Anatoly S Krotov iD, Aisen A Kychkin iD, Anna A Gavrilieva iD

Polymers · 11.09.2025 · 17 (18) · 2457

DOI: 10.3390/polym17182457 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 11.09.2025. Verfasst von Anatoly K Kychkin und 5 weiteren Autor:innen. Beteiligte Einrichtung: V.P. Larionov Institute of the Physical-Technical Problems of the North of the Siberian Branch of the RAS, 1, Oktyabrskaya Str., Yakutsk 677980, Russ…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Russian Science Foundation (RSF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The durability of basalt fiber-reinforced polymer (BFRP) and glass fiber-reinforced polymer (GFRP) composites was evaluated under extreme cold conditions in Yakutsk (−54 to +36 °C. Laminates (18 layers, epoxy CYD-128) were exposed outdoors for three years. Mechanical testing showed tensile strength and modulus reductions of 22–32% for GFRP, compared with only 6–12% for BFRP. Dynamic mechanical analysis indicated that the glass transition temperature decreased by 11–14 °C in GFRP and 4–6 °C in BFRP. Mass loss kinetics were studied on specimens of different sizes (10 × 10, 20 × 20, and 40 × 40 mm) over 405 days. Seasonal sorption ranged between 0.01–0.19%, while long-term degradation followed a Fickian law with diffusion coefficients of degradation products from 1×10−4 to 0.29mm2/day. A diffusion-based model was proposed, where total mass change is represented as the superposition of reversible sorption and irreversible degradation. The model accurately reproduced experimental trends, highlighting the higher resistance of BFRP. Surface morphology analysis revealed matrix erosion and microcracking on exposed surfaces, with average roughness increasing from 1.61–5.61 µm to 5.86–11.73 µm. Thermomechanical analysis confirmed that BFRP maintained more stable coefficients of linear thermal expansion (−60 to 100 °C) than GFRP, reducing thermally induced stresses during seasonal cycles. These findings demonstrate the superior stability of BFRP compared with GFRP under cold-climate exposure. Comparison of experimental results with mathematical modeling demonstrated that the primary cause of polymer matrix degradation is the action of abrupt internal stresses arising during thermal cycling under extreme cold climate conditions.

Schlagwörter

Stichwörter der Autor:innen

BFRPGFRPcoefficient of linear thermal expansion (CLTE)degradationextreme cold climateglass transition temperature (Tg)laminateoutdoor exposuretensile strength

Autor:innen und Institutionen

  • V.P. Larionov Institute of the Physical-Technical Problems of the North of the Siberian Branch of the RAS, 1, Oktyabrskaya Str., Yakutsk 677980, Russia.
  • Federal Research Centre "The Yakut Scientific Centre of the Siberian Branch of the Russian Academy of Sciences", 2, Petrovskogo Str., Yakutsk 677000, Russia.

ORCID-Profile: Anatoly K Kychkin, Oleg V Startsev, Mikhail P Lebedev, Anatoly S Krotov, Aisen A Kychkin, Anna A Gavrilieva

Förderung

  • Russian Science Foundation (RSF)

Zitieren

APA

Kychkin, A. K., Startsev, O. V., Lebedev, M. P., Krotov, A. S., Kychkin, A. A., & Gavrilieva, A. A. (2025). Durability of Basalt- and Glass Fiber-Reinforced Polymers: Influence of Internal Stresses, Mass Loss Modeling, and Mechanical/Thermomechanical Properties Under Extreme Cold Climate Exposure. Polymers, 17(18), 2457. https://doi.org/10.3390/polym17182457

Vancouver

Kychkin AK, Startsev OV, Lebedev MP, Krotov AS, Kychkin AA, Gavrilieva AA. Durability of Basalt- and Glass Fiber-Reinforced Polymers: Influence of Internal Stresses, Mass Loss Modeling, and Mechanical/Thermomechanical Properties Under Extreme Cold Climate Exposure. Polymers. 2025;17(18):2457. doi:10.3390/polym17182457

BibTeX
@article{Kychkin2025,
  author = {Kychkin, Anatoly K and Startsev, Oleg V and Lebedev, Mikhail P and Krotov, Anatoly S and Kychkin, Aisen A and Gavrilieva, Anna A},
  title = {Durability of Basalt- and Glass Fiber-Reinforced Polymers: Influence of Internal Stresses, Mass Loss Modeling, and Mechanical/Thermomechanical Properties Under Extreme Cold Climate Exposure},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {18},
  pages = {2457},
  doi = {10.3390/polym17182457}
}
Kostenlos starten →