EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Finite Element Analysis and Experimental Investigation on the Machinability of PMMA/CNT Composites via Nanosectioning

Guoyu Fu iD, Jia Ge, Hao Li, Fengzhen Sun, Weizhou Wu

Polymers · 09.09.2025 · 17 (18) · 2441

DOI: 10.3390/polym17182441 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 09.09.2025. Verfasst von Guoyu Fu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education, Tianjin University, Tianjin 300072, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Top Project of Natural Science Foundation of Tianjin.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, an innovative modeling approach has been proposed to demonstrate the removal mechanisms of Polymethyl Methacrylate (PMMA) reinforced with randomly distributed carbon nanotubes (CNTs) during nanosectioning. The viscoplastic behavior of the matrix polymer was described using the Mulliken–Boyce model and the distribution of the CNTs in the matrix was modeled using the random sequential adsorption (RSA) method. The effects of cutting thickness and CNT loading on the machinability of the nanocomposites are explored. Subsequent experiments were conducted to validate the modeling. It reveals that the addition of CNT increases the resistance to cutting, compared to the malleable matrix. Although the primary strain distribution for both plain PMMA and PMMA/CNT composites aligns closely, discernible disparities between the two materials emerge. A force augmentation is anticipated whenever a nanotube interacts with the cutting tool, which causes surface protrusions and sub-surface damage. The addition of CNT with a loading lower than 1.0 wt% does not change the mechanisms of chip formation, but the addition of 1.0 wt% CNTs increases cutting force by approximately 32%. This work provides a feasible approach and framework to numerically model the nanosectioning of CNT-reinforced thermoplastics.

Schlagwörter

Stichwörter der Autor:innen

Mulliken–Boyce modelcarbon nanotubes (CNTs)nanosectioningpolymer nanocomposites

Autor:innen und Institutionen

  • Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education, Tianjin University, Tianjin 300072, China.
  • School of Mechanical and Aerospace Engineering, Queen's University Belfast, Belfast BT9 5AH, UK.
  • School of Mechanical Engineering, Tongji University, 4800 Cao'an Road, Shanghai 201804, China.

ORCID-Profile: Guoyu Fu

Förderung

  • National Natural Science Foundation of China
  • Top Project of Natural Science Foundation of Tianjin

Zitieren

APA

Fu, G., Ge, J., Li, H., Sun, F., & Wu, W. (2025). Finite Element Analysis and Experimental Investigation on the Machinability of PMMA/CNT Composites via Nanosectioning. Polymers, 17(18), 2441. https://doi.org/10.3390/polym17182441

Vancouver

Fu G, Ge J, Li H, Sun F, Wu W. Finite Element Analysis and Experimental Investigation on the Machinability of PMMA/CNT Composites via Nanosectioning. Polymers. 2025;17(18):2441. doi:10.3390/polym17182441

BibTeX
@article{Fu2025,
  author = {Fu, Guoyu and Ge, Jia and Li, Hao and Sun, Fengzhen and Wu, Weizhou},
  title = {Finite Element Analysis and Experimental Investigation on the Machinability of PMMA/CNT Composites via Nanosectioning},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {18},
  pages = {2441},
  doi = {10.3390/polym17182441}
}
Kostenlos starten →