Reprocessing of Simulated Industrial PLA Waste for Food Contact Applications
Polymers · 09.09.2025 · 17 (18) · 2439
DOI: 10.3390/polym17182439 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 09.09.2025. Verfasst von Javiera Sepúlveda-Carter und 3 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Ingeniería Química Industrial y del Medio Ambiente, E.T.S. de Ingenieros Industriales, Universidad Politécnica de Madrid, C/José Guti…. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 101 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Spanish Ministry of Science and Innovation (MICINN), Spanish Ministry of Science and Innovation (MICINN) through PID-AEI project (PID2021-123753NA-C32), ERDF “A way of making Europe” in conjunction with the “European Union”, TED-AEI project.
Abstract (Originalsprache)
This study explores reusing discarded industrial polylactic acid (PLA), such as defective parts, scraps and burrs, for food contact applications. Reprocessing of PLA (PLA-RP) was simulated via melt extrusion, and the obtained pellets were characterized in terms of viscosity average molecular weight (Mv), melt flow index (MFI), the presence of non-intentionally added substances (NIASs) and the absence of metals to ensure that no substances exceeded the specific migration limits (SMLs). A slight reduction in the Mv, accompanied by an increase in the MFI, was observed in PLA-RP. In virgin PLA, fewer compounds were detected, likely related to residual additives. A higher variety and concentration of volatile and non-listed compounds were observed in reprocessed PLA (PLA-RP), with three exceeding their assigned Cramer class thresholds, requiring further evaluation. Most identified substances were typically linked to thermal degradation or potential additives for reprocessing. In both the virgin and reprocessed materials, all substances with SMLs remained below applicable thresholds, including trace metals. The PLA-RP was further processed into films by means of a compression moulding process. The structure, mechanical behaviour, thermal stability and water vapor transmission rate were comparable to those of virgin PLA, indicating no significant changes. The overall migration level tested in a fatty food simulant remained below regulatory limits. The materials fully disintegrated under laboratory-scale composting conditions in less than 3 weeks. Thus, reprocessed PLA shows great potential as a non-migrating material of interest in the sustainable food packaging field.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Departamento de Ingeniería Química Industrial y del Medio Ambiente, E.T.S. de Ingenieros Industriales, Universidad Politécnica de Madrid, C/José Gutiérrez Abascal 2, 28006 Madrid, Spain.
- Grupo de Investigación: Polímeros, Caracterización y Aplicaciones (POLCA), 28006 Madrid, Spain.
- The Circular Lab, ECOEMBALAJES España, C/del Cardenal Marcelo Spínola 14, 28016 Madrid, Spain.
ORCID-Profile: Javiera Sepúlveda-Carter, Simón Faba, Marcos Sánchez Rodríguez, Marina P Arrieta
Förderung
- Spanish Ministry of Science and Innovation (MICINN)
- Spanish Ministry of Science and Innovation (MICINN) through PID-AEI project (PID2021-123753NA-C32)
- ERDF “A way of making Europe” in conjunction with the “European Union”, TED-AEI project
- the “European Union NextGeneration EU/PRTR”
- “SDGine for Healthy People and Cities” project from the Universidad Politécnica de Madrid
- National Commission for Scientific and Technological Research (ANID, Chile)
Zitieren
APA
Sepúlveda-Carter, J., Faba, S., Rodríguez, M. S., & Arrieta, M. P. (2025). Reprocessing of Simulated Industrial PLA Waste for Food Contact Applications. Polymers, 17(18), 2439. https://doi.org/10.3390/polym17182439
Vancouver
Sepúlveda-Carter J, Faba S, Rodríguez MS, Arrieta MP. Reprocessing of Simulated Industrial PLA Waste for Food Contact Applications. Polymers. 2025;17(18):2439. doi:10.3390/polym17182439
BibTeX
@article{SeplvedaCarter2025,
author = {Sepúlveda-Carter, Javiera and Faba, Simón and Rodríguez, Marcos Sánchez and Arrieta, Marina P},
title = {Reprocessing of Simulated Industrial PLA Waste for Food Contact Applications},
journal = {Polymers},
year = {2025},
volume = {17},
number = {18},
pages = {2439},
doi = {10.3390/polym17182439}
}
EUVIMED