Physics-Informed Neural Network Modeling of Inflating Dielectric Elastomer Tubes for Energy Harvesting Applications
Polymers · 28.08.2025 · 17 (17) · 2329
DOI: 10.3390/polym17172329 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 28.08.2025. Verfasst von Mahdi Askari-Sedeh und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran 1439957131, Iran. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea (NRF).
Abstract (Originalsprache)
A physics-informed neural network (PINN) framework is developed to model the large deformation and coupled electromechanical response of dielectric elastomer tubes for energy harvesting. The system integrates incompressible neo-Hookean elasticity with radial electric loading and compressible gas inflation, leading to nonlinear equilibrium equations with deformation-dependent boundary conditions. By embedding the governing equations and boundary conditions directly into its loss function, the PINN enables accurate, mesh-free solutions without requiring labeled data. It captures realistic pressure–volume interactions that are difficult to address analytically or through conventional numerical methods. The results show that internal volume increases by over 290% during inflation at higher reference pressures, with residual stretch after deflation reaching 9.6 times the undeformed volume. The axial force, initially tensile, becomes compressive at high voltages and pressures due to electromechanical loading and geometric constraints. Harvested energy increases strongly with pressure, while voltage contributes meaningfully only beyond a critical threshold. To ensure stable training across coupled stages, the network is optimized using the Optuna algorithm. Overall, the proposed framework offers a robust and flexible tool for predictive modeling and design of soft energy harvesters.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran 1439957131, Iran.
- Mechanical Engineering Department, Faculty of Engineering, Bu-Ali Sina University, Hamedan 6517838695, Iran.
- Department of Civil and Environmental Engineering, Hongik University, Seoul 04066, Republic of Korea.
ORCID-Profile: Mahdi Askari-Sedeh, Mohammadamin Faraji, Eunsoo Choi, Alireza Ostadrahimi, Mostafa Baghani
Förderung
- National Research Foundation of Korea (NRF)
Zitieren
APA
Askari-Sedeh, M., Faraji, M., Baniardalan, M., Choi, E., Ostadrahimi, A., & Baghani, M. (2025). Physics-Informed Neural Network Modeling of Inflating Dielectric Elastomer Tubes for Energy Harvesting Applications. Polymers, 17(17), 2329. https://doi.org/10.3390/polym17172329
Vancouver
Askari-Sedeh M, Faraji M, Baniardalan M, Choi E, Ostadrahimi A, Baghani M. Physics-Informed Neural Network Modeling of Inflating Dielectric Elastomer Tubes for Energy Harvesting Applications. Polymers. 2025;17(17):2329. doi:10.3390/polym17172329
BibTeX
@article{AskariSedeh2025,
author = {Askari-Sedeh, Mahdi and Faraji, Mohammadamin and Baniardalan, Mohammadamin and Choi, Eunsoo and Ostadrahimi, Alireza and Baghani, Mostafa},
title = {Physics-Informed Neural Network Modeling of Inflating Dielectric Elastomer Tubes for Energy Harvesting Applications},
journal = {Polymers},
year = {2025},
volume = {17},
number = {17},
pages = {2329},
doi = {10.3390/polym17172329}
}
EUVIMED